OPNsense Forum
English Forums => General Discussion => Topic started by: albercuba on January 16, 2019, 11:39:47 am
-
Hi everyone.
When I configure an interface as static and I go to assign the IP address, in the mask do I have to set the mask bits for the whole network or only for that interface?
Example:
Let's say my network is 10.0.1.0 with netmask 255.255.248.0
When I assign the IP 10.0.1.10 to one of my firewall interfaces, in the mask bit do I set 32 or 21?
-
21
-
Thanks