Home
Help
Search
Login
Register
OPNsense Forum
»
Archive
»
18.7 Legacy Series
»
ipsec site to site
« previous
next »
Print
Pages: [
1
]
Author
Topic: ipsec site to site (Read 3122 times)
opnsensef8
Newbie
Posts: 17
Karma: 0
ipsec site to site
«
on:
September 27, 2018, 05:34:58 pm »
Hello,
sorry for maybe bothering you.
We do have an OPNsense connected directly to the internet (site a) and another OPNsense, connected to a router that is not under our control (buliding is used by many companies with the internet access over a "LAN cable" and a private network: site b). They both have DNS names registered to the public IP (site b using a dyndns service).
site a and site b should be connected to each other. OpenVPN connects, but we have performance issues and packet sizes down to 0 with interruptions of larger file transfers. There was no solution for this (MSS, MTU...DF bit en/dis and so on).
So how can we setup ipsec between site a and site b.
Logged
Julissa
Newbie
Posts: 3
Karma: 0
Re: ipsec site to site
«
Reply #1 on:
October 04, 2018, 05:23:34 pm »
Hello,
Regarding your issue, I need to know if there is a way to monitoring the IPSec. Sometimes goes down. I need monitoring the status for the IP Sec.
Thank you in advance if someone has some option.
Logged
mrpsycho
Newbie
Posts: 33
Karma: 1
Re: ipsec site to site
«
Reply #2 on:
October 08, 2018, 01:02:21 pm »
Julissa,
you have to set site A as responder, and side B as initiator.
Logged
Print
Pages: [
1
]
« previous
next »
OPNsense Forum
»
Archive
»
18.7 Legacy Series
»
ipsec site to site