Home
Help
Search
Login
Register
OPNsense Forum
»
Archive
»
18.7 Legacy Series
»
Can't Access GUI on Secondary
« previous
next »
Print
Pages: [
1
]
Author
Topic: Can't Access GUI on Secondary (Read 3847 times)
halianelf
Newbie
Posts: 7
Karma: 0
Can't Access GUI on Secondary
«
on:
September 12, 2018, 01:23:38 am »
I have a pair of firewalls and a really weird issue. I'm basically never attached to my LAN. I either use the public IP that's has a rule to only allow specific IPs or I'm coming across a VPN.
My primary works fine. I can access it both across the tunnel or using it's public. My secondary, I can't except coming from my VM I used for testing that's on the LAN. Even if I put the primary in persistent maintenance mode, it doesn't work on the CARP IP either.
I enabled logging on the rule that I have allowing traffic from the WAN and the log shows it being allowed but all I ever get is "This site can’t be reached x.x.x.x took too long to respond." So at this point I'm at a loss as to what's causing it. It was working fine until I had it reboot (through GUI) because it was giving an error checking for updates yesterday.
Version: OPNsense 18.7.1_3-amd64
Logged
mimugmail
Hero Member
Posts: 6756
Karma: 494
Re: Can't Access GUI on Secondary
«
Reply #1 on:
September 12, 2018, 06:27:04 am »
Can you also login to VPN when the secondary is master?
Logged
WWW:
www.routerperformance.net
Support plans:
https://www.max-it.de/en/it-services/opnsense/
Commercial Plugins (German):
https://opnsense.max-it.de/
halianelf
Newbie
Posts: 7
Karma: 0
Re: Can't Access GUI on Secondary
«
Reply #2 on:
September 12, 2018, 10:53:10 am »
No, doesn't look like the the OpenVPN nor the IPSec (at least initiating it from the remote side) work on the secondary either.
Logged
mimugmail
Hero Member
Posts: 6756
Karma: 494
Re: Can't Access GUI on Secondary
«
Reply #3 on:
September 12, 2018, 04:06:23 pm »
Can you check if your HA setup works like desired and perhaps we fix this first
Logged
WWW:
www.routerperformance.net
Support plans:
https://www.max-it.de/en/it-services/opnsense/
Commercial Plugins (German):
https://opnsense.max-it.de/
halianelf
Newbie
Posts: 7
Karma: 0
Re: Can't Access GUI on Secondary
«
Reply #4 on:
September 12, 2018, 06:09:33 pm »
Pretty sure my HA is working properly but feel free to take a look and let me know if you see something off. If I missed anything you want to see/think will help troubleshoot, let me know. The rules did update on the secondary when I tried changing the GUI allow run on the WAN interface to the 3 IPs (One for each + CARP) for the firewalls rather than just "This Firewall".
Logged
halianelf
Newbie
Posts: 7
Karma: 0
Re: Can't Access GUI on Secondary
«
Reply #5 on:
September 17, 2018, 11:56:57 pm »
It may be a NAT issue but not sure exactly what to do to fix it. If I ping an outside IP using the default it works and gets a response. If I change it to the inside it doesn't. Not sure if that helps.
Logged
Print
Pages: [
1
]
« previous
next »
OPNsense Forum
»
Archive
»
18.7 Legacy Series
»
Can't Access GUI on Secondary