Home
Help
Search
Login
Register
OPNsense Forum
»
Archive
»
18.7 Legacy Series
»
OpenVPN in peer2peer mode
« previous
next »
Print
Pages: [
1
]
Author
Topic: OpenVPN in peer2peer mode (Read 2547 times)
cleblhuber
Newbie
Posts: 3
Karma: 0
OpenVPN in peer2peer mode
«
on:
October 19, 2018, 11:49:50 pm »
dear folks.
i have a problem with the openvpn client in peer2peer mode.
i cannot reach the remote network from the local network, but from the opnsense i can ping the remote network.
the tunnel is up but in the logfile there are messages from route not to be able to add the route. see attachment
days ago the same config worked very well, so i have no idea what i did wrong.
kind regards
Chris
Logged
stargazer
Newbie
Posts: 1
Karma: 0
Re: OpenVPN in peer2peer mode
«
Reply #1 on:
January 21, 2019, 07:27:04 am »
I was looking at a similar issue and found this solution, which worked for me.
https://forum.opnsense.org/index.php?topic=11046.msg50463#msg50463
Basically, use a /30 subnet for peer2peer. It appears to get confused and assign two separate /30's. Thus, I had
10.13.46.0/24
and the master was getting 10.13.46.1 & 2, and the client was getting 10.13.46.6 & 7. I set it to
10.13.46.0/30
and now they both have the same subnet and work well.
Logged
Print
Pages: [
1
]
« previous
next »
OPNsense Forum
»
Archive
»
18.7 Legacy Series
»
OpenVPN in peer2peer mode