OPNsense
  • Home
  • Help
  • Search
  • Login
  • Register

  • OPNsense Forum »
  • Archive »
  • 18.1 Legacy Series »
  • IPSec tunnel - transfer data problem
« previous next »
  • Print
Pages: [1]

Author Topic: IPSec tunnel - transfer data problem  (Read 2319 times)

zoltarex

  • Newbie
  • *
  • Posts: 1
  • Karma: 0
    • View Profile
IPSec tunnel - transfer data problem
« on: January 31, 2018, 09:29:40 am »
Hello, can anyone help me with this configuration?

IPSec setup:
Phase 1: IPv4 IKE WAN X main AES (256 bits) + SHA1 + DH Group 5 (1536 bits)   Mutual PSK
Phase 2: ESP IPv4 tunnel 192.168.165.193 126.0.0.0/8 AES (256 bits) SHA1
and SPD entry 192.168.1.0/24

Firewall setup:
IPv4 ESP   *   *   WAN address   *   * IPSec ESP    
IPv4 AH       *   *   WAN address   *   * IPSec AH    
IPv4 UDP   *   *   WAN address   500 (ISAKMP) * IPSec ISAKMP    
IPv4 UDP   *   *   WAN address   4500 (IPsec NAT-T) * IPsec NAT-T   

NAT One-to-one:
IPsec 192.168.165.193/32 192.168.1.0/24   126.0.0.0/8

0 data entry to tunnel. Tunnel is working and sync on phase 1 and phase 2.
Logged

  • Print
Pages: [1]
« previous next »
  • OPNsense Forum »
  • Archive »
  • 18.1 Legacy Series »
  • IPSec tunnel - transfer data problem
 

OPNsense is an OSS project © Deciso B.V. 2015 - 2023 All rights reserved
  • SMF 2.0.19 | SMF © 2021, Simple Machines
    Privacy Policy
    | XHTML | RSS | WAP2