OPNsense
  • Home
  • Help
  • Search
  • Login
  • Register

  • OPNsense Forum »
  • Archive »
  • 17.7 Legacy Series »
  • Traffic shaping in Bridged mode
« previous next »
  • Print
Pages: [1]

Author Topic: Traffic shaping in Bridged mode  (Read 2638 times)

Enrico

  • Newbie
  • *
  • Posts: 2
  • Karma: 0
    • View Profile
Traffic shaping in Bridged mode
« on: September 15, 2017, 01:00:07 pm »
Hi Everyone,

I'm having this problem with V17.7.1_2 (but I also had the same on V17.1).

My setup is as follow:

[WAN interface] ---- [Bridge] ---- [LAN interface]

WAN, Bridge and LAN are all without an address and I'm using a dedicated interface to manage the system.

I set up tunables as follow:

net.link.bridge.pfil_bridge=0
net.link.bridge.ipfw=1
net.link.ether.ipfw=1

Everything work perfectly until I reboot the system.
When the system come back online the settings in Tunables are not automatically applied and I need to manually apply them to get shaping working again.

I did even try to put:

net.link.bridge.pfil_bridge=0
net.link.bridge.ipfw=1
net.link.ether.ipfw=1

into /etc/sysctl.conf but they do not seems to be loaded at system boot.

This is the output I get when I manually apply the sysctl after system boot

# sysctl -f /etc/sysctl.conf
# net.link.bridge.ipfw: 1 -> 1
# net.link.ether.ipfw: 0 -> 1
# net.link.bridge.pfil_bridge: 0 -> 0

and shaping works again.

Any idea?

Thanks.

Regards,

Enrico
Logged

  • Print
Pages: [1]
« previous next »
  • OPNsense Forum »
  • Archive »
  • 17.7 Legacy Series »
  • Traffic shaping in Bridged mode
 

OPNsense is an OSS project © Deciso B.V. 2015 - 2023 All rights reserved
  • SMF 2.0.19 | SMF © 2021, Simple Machines
    Privacy Policy
    | XHTML | RSS | WAP2