OPNsense
  • Home
  • Help
  • Search
  • Login
  • Register

  • OPNsense Forum »
  • Archive »
  • 17.7 Legacy Series »
  • Can't access GUI via lan ip
« previous next »
  • Print
Pages: [1]

Author Topic: Can't access GUI via lan ip  (Read 6648 times)

Kapman

  • Newbie
  • *
  • Posts: 9
  • Karma: 0
    • View Profile
Can't access GUI via lan ip
« on: January 16, 2018, 03:58:23 am »
Hello everyone,
By mistake, I disabled my lan interface and locked myself out of OPNsense GUI as well as eliminating access to internet. SO I went to the console on the actual pc running OPNsense and re-assigned the the lan interface to the same IP address it was previously.  The internet access came back, but I can no longer access to webgui via ip address. I can use a domain name on the lan (doesn't work when using the same domain external to the lan which is good), but not the ip.  Does anyone know which setting I must change to gain access back using the ip address (192.168.1.1)?

Logged

cardins2u

  • Jr. Member
  • **
  • Posts: 70
  • Karma: 2
    • View Profile
Re: Can't access GUI via lan ip
« Reply #1 on: January 16, 2018, 04:01:56 am »
If its a VM then open up esxi and reset the interfaces.

If its a physical box. Hook up a monitor and assign interfaces again. That should give you acess to the gui again.
Logged

Kapman

  • Newbie
  • *
  • Posts: 9
  • Karma: 0
    • View Profile
Re: Can't access GUI via lan ip
« Reply #2 on: January 16, 2018, 04:10:42 am »
Thanks for the quick reply.
I did assign the lan interface, but that only gave me access to the GUI via a domain name.  What must I do to get 192.168.1.1 to work instead?  I plan on reusing the domain for another use.
Logged

cardins2u

  • Jr. Member
  • **
  • Posts: 70
  • Karma: 2
    • View Profile
Re: Can't access GUI via lan ip
« Reply #3 on: January 16, 2018, 05:21:32 am »
go into SSH

change the ip of your lan interface That should enable the lan interface again and reset your ips.

Logged

Kapman

  • Newbie
  • *
  • Posts: 9
  • Karma: 0
    • View Profile
Re: Can't access GUI via lan ip
« Reply #4 on: January 16, 2018, 06:26:06 am »
Thanks for the tip.  I just tried that and while the ip does change successfully, I still can't access the webgui at that address.  Is there a default when re-assigning that turns off access to the webgui over ip address?
Logged

Kapman

  • Newbie
  • *
  • Posts: 9
  • Karma: 0
    • View Profile
Re: Can't access GUI via lan ip
« Reply #5 on: January 16, 2018, 06:29:30 am »
I also reloaded all services just in case it might help, still the same issue.
Logged

cardins2u

  • Jr. Member
  • **
  • Posts: 70
  • Karma: 2
    • View Profile
Re: Can't access GUI via lan ip
« Reply #6 on: January 16, 2018, 07:04:19 am »
nope. it should be http://192.168.1.1 or https://192.168.1.1

did you try restarting opnsense. Sometimes in the past I had to restart it to even access it after changing ips.
Logged

Kapman

  • Newbie
  • *
  • Posts: 9
  • Karma: 0
    • View Profile
Re: Can't access GUI via lan ip
« Reply #7 on: January 27, 2018, 09:52:26 pm »
I restarted, same issue.  At this point is re-installation the best option?
Logged

  • Print
Pages: [1]
« previous next »
  • OPNsense Forum »
  • Archive »
  • 17.7 Legacy Series »
  • Can't access GUI via lan ip
 

OPNsense is an OSS project © Deciso B.V. 2015 - 2023 All rights reserved
  • SMF 2.0.19 | SMF © 2021, Simple Machines
    Privacy Policy
    | XHTML | RSS | WAP2