Home
Help
Search
Login
Register
OPNsense Forum
»
Archive
»
17.7 Legacy Series
»
AHCI Timeout and Reboot problem
« previous
next »
Print
Pages: [
1
]
Author
Topic: AHCI Timeout and Reboot problem (Read 8045 times)
DarkBeard
Newbie
Posts: 16
Karma: 1
AHCI Timeout and Reboot problem
«
on:
January 10, 2018, 01:27:41 pm »
Hi,
I bought a mini computer, with 6 ports of etnernet and intel i3 3700, which was positioned by the seller under the router. But I faced two problems:
1. When the system is rebooted or turned off, the uptime shows nothing further.
2. After the second reboot of the already installed system on the SSD drive (mPCIe), the AHCI channel timeout occurs.
Here is a screenshot:
https://yadi.sk/d/-3Q8U4x43RL5U8
There is a lot of writing that this is in 11 FreeBSD is this problem - do not agree.
The last PFsense on FreeBSD 11.1-RELEASE-p6 is working fine.
But I like this product, and I would like to use OPNsense
Can someone tell me where to look?
Logged
franco
Administrator
Hero Member
Posts: 17605
Karma: 1603
Re: AHCI Timeout and Reboot problem
«
Reply #1 on:
January 10, 2018, 11:07:13 pm »
Hi there,
The AHCI change you are looking for:
https://github.com/opnsense/core/commit/8e85edd4
We've been on FreeBSD 11.0 for a year and quite happy with it. But then 11.1 came out so that's what is next.
Incidentally, 18.1-RC1 is coming out tomorrow as scheduled with both things hopefully fixed.
Cheers,
Franco
«
Last Edit: January 11, 2018, 12:03:08 am by franco
»
Logged
DarkBeard
Newbie
Posts: 16
Karma: 1
Re: AHCI Timeout and Reboot problem
«
Reply #2 on:
January 11, 2018, 08:30:50 pm »
Hi, franco
Thanks for the answer.
But this setting does not help.
I entered it in loader.conf.local
The problem did not dare.
Logged
franco
Administrator
Hero Member
Posts: 17605
Karma: 1603
Re: AHCI Timeout and Reboot problem
«
Reply #3 on:
January 12, 2018, 07:06:43 am »
And with the 18.1-RC1 images?
Cheers,
Franco
Logged
DarkBeard
Newbie
Posts: 16
Karma: 1
Re: AHCI Timeout and Reboot problem
«
Reply #4 on:
January 12, 2018, 07:45:14 am »
No, I contributed only those settings that are referenced by github.
I could not find the image 18.1-RC1. Can you give me a link to it?
Logged
franco
Administrator
Hero Member
Posts: 17605
Karma: 1603
Re: AHCI Timeout and Reboot problem
«
Reply #5 on:
January 12, 2018, 09:14:04 am »
Ok, here you go:
https://pkg.opnsense.org/releases/18.1/
Logged
DarkBeard
Newbie
Posts: 16
Karma: 1
Re: AHCI Timeout and Reboot problem
«
Reply #6 on:
January 12, 2018, 06:42:04 pm »
The problem with rebooting is no more.
The problem with the AHCI timeout is not fixed.
Logged
DarkBeard
Newbie
Posts: 16
Karma: 1
Re: AHCI Timeout and Reboot problem
«
Reply #7 on:
January 17, 2018, 01:27:21 pm »
Hi, Franco
I spent many more experiments with the configuration of the system, but on my computer configuration it does not want to work. But if I replace my mPCI 512 GB drive with a SATA drive of 128 GB, the system starts to boot without problems. Both hard drives from the company SAMSUNG
Regards
Logged
franco
Administrator
Hero Member
Posts: 17605
Karma: 1603
Re: AHCI Timeout and Reboot problem
«
Reply #8 on:
January 17, 2018, 10:09:56 pm »
If this is on amd64, what happens when you install using MBR mode instead? We have seen GPT being destroyed by the occasional blue moon... it's not been the most fun we've had getting some of those issues fixed.
Cheers,
Franco
Logged
DarkBeard
Newbie
Posts: 16
Karma: 1
Re: AHCI Timeout and Reboot problem
«
Reply #9 on:
January 18, 2018, 10:14:21 am »
Hi, Franco
I put it many times in different modes, but I checked MBR again, a miracle did not happen, after the second reboot, the AHCI timeouts
Regards,
Konstantin
Logged
franco
Administrator
Hero Member
Posts: 17605
Karma: 1603
Re: AHCI Timeout and Reboot problem
«
Reply #10 on:
January 18, 2018, 10:37:15 am »
Hi Konstantin,
Sorry, no idea what's going on there. ;(
Cheers,
Franco
Logged
Print
Pages: [
1
]
« previous
next »
OPNsense Forum
»
Archive
»
17.7 Legacy Series
»
AHCI Timeout and Reboot problem
