Home
Help
Search
Login
Register
OPNsense Forum
»
Archive
»
17.7 Legacy Series
»
Comcast Business IPv6 Setting
« previous
next »
Print
Pages: [
1
]
Author
Topic: Comcast Business IPv6 Setting (Read 6583 times)
cardins2u
Jr. Member
Posts: 71
Karma: 2
Comcast Business IPv6 Setting
«
on:
January 16, 2018, 12:10:32 am »
Anyone here able to setup Comcast Business IPv6 on OPNSense?
I'm having a hard time.
1. WAN - DHCPv6
- Prefix 56
2. LAN - Track Interface
- IPv6 Interface WAN
- ID : 0
I'm getting IPv6 Ips internally but I cannot ping any ipv6. I cannot ping ipv6 from ssh on OPNSense at all.
WAN IP Address (IPv6): 2001:558:600a:ce:xxxxxx846
WAN Default Gateway Address (IPv6): fe80::2e86:xxxx:xxxx:ec22
Delegated prefix (IPv6): 2603:3023:xxd:xxxx::/56
Primary DNS Server (IPv6):2001:558:feed::1
Secondary DNS Server (IPv6):2001:558:feed::2
WAN Link Local Address (IPv6): fe80::xxx:27ff:xxxx:2461
Logged
opnfwb
Sr. Member
Posts: 326
Karma: 46
Re: Comcast Business IPv6 Setting
«
Reply #1 on:
January 16, 2018, 06:02:44 am »
I don't have exactly the same setup but, have you tried Prefix 64 on the WAN-side DHCP6 client?
I'm running Prefix 64 DHCP6 on Spectrum/TWC and am getting WAN and LAN IP6 addresses and firewalling/routing is working quite well.
Logged
cardins2u
Jr. Member
Posts: 71
Karma: 2
Re: Comcast Business IPv6 Setting
«
Reply #2 on:
January 16, 2018, 07:05:32 am »
yeah I have. I tried 56 60 and 64
no lucky. Comcast is a nightmare.
Logged
bartjsmit
Hero Member
Posts: 1985
Karma: 193
Re: Comcast Business IPv6 Setting
«
Reply #3 on:
January 16, 2018, 08:40:21 am »
Try allowing inbound ICMP on IPv6 on the WAN interface?
Bart...
Logged
marjohn56
Hero Member
Posts: 1699
Karma: 179
Re: Comcast Business IPv6 Setting
«
Reply #4 on:
January 16, 2018, 11:30:49 am »
Are you seeing v6 addresses on the WAN and/or LAN interfaces?
If not, then select debug mode on dhcp6 and have a look at the logs for dhcp6c entries. Although you'll find the GUI log entries in Services->DHCP->log file, it will be more productive to look at the log file itself /var/log/dhcpd.log.
I would suggest after you enable debugging and save then you reboot, otherwise its possible you could end up with multiple dhcp6c clients.
After the reboot, then look at the log file.
«
Last Edit: January 16, 2018, 11:52:41 am by marjohn56
»
Logged
OPNsense 24.7
-
Qotom Q355G4
- ISP -
Squirrel 1Gbps
.
Team Rebellion Member
- If we've helped you remember to applaud
cardins2u
Jr. Member
Posts: 71
Karma: 2
Re: Comcast Business IPv6 Setting
«
Reply #5 on:
January 17, 2018, 04:06:19 am »
hmm werid. I turn on log. rebooted check if there dhcp6c logs. theres no logs of what so ever. just dhcprelay logs for a dhcp relay i'm running internal.
Logged
marjohn56
Hero Member
Posts: 1699
Karma: 179
Re: Comcast Business IPv6 Setting
«
Reply #6 on:
January 17, 2018, 09:07:22 am »
it is iinteresting as it means dhcp6c is not being launched. Enable directly send solicit and repeat the procedure.
Logged
OPNsense 24.7
-
Qotom Q355G4
- ISP -
Squirrel 1Gbps
.
Team Rebellion Member
- If we've helped you remember to applaud
cardins2u
Jr. Member
Posts: 71
Karma: 2
Re: Comcast Business IPv6 Setting
«
Reply #7 on:
January 18, 2018, 03:58:24 am »
good news, I got ipv6 address. The IP match the prefix from comcast modem.
But when I ping I get "Request timed out"
Logged
marjohn56
Hero Member
Posts: 1699
Karma: 179
Re: Comcast Business IPv6 Setting
«
Reply #8 on:
January 18, 2018, 09:33:24 am »
Good.
Next step, do you have a default allow ipv6 traffic rules in your firewall?
Also there's a disable IPv6 setting somewhere, but I cannot remember where, it should be off by default.
Logged
OPNsense 24.7
-
Qotom Q355G4
- ISP -
Squirrel 1Gbps
.
Team Rebellion Member
- If we've helped you remember to applaud
Print
Pages: [
1
]
« previous
next »
OPNsense Forum
»
Archive
»
17.7 Legacy Series
»
Comcast Business IPv6 Setting