OPNsense
  • Home
  • Help
  • Search
  • Login
  • Register

  • OPNsense Forum »
  • Archive »
  • 17.7 Legacy Series »
  • Captive Portal AND Proxy
« previous next »
  • Print
Pages: [1]

Author Topic: Captive Portal AND Proxy  (Read 3138 times)

FCM

  • Newbie
  • *
  • Posts: 40
  • Karma: 1
    • View Profile
Captive Portal AND Proxy
« on: November 02, 2017, 03:51:26 pm »
Hello,
I try to make working the proxy service and the captive portal.
I have successfully set the proxy so people on the targetted LAN can't go where they have nothing to do (not entirely successfull because google.com/google.fr doesn't work anymore, but that's another problem).
Then I have tried (for a long time) to make captive portal to work with...

After a lot of tries, forum checks,..... I only have 2 results :
1. nothing works (it can't find page, like DNS problem... but, yes, the DNS rules is in first)
2. if I remove the automatic NAT rules created by the proxy for the 3128/3129 forcing, It works but the proxy does nothing : all the web sites are free to go...

I checked the "Shared forwarding" rule in advanced/firewall setting
I checked HTTP and HTTPS transparent proxy rules in captive portal zone
The LAN interface is in Proxy interfaces (forward proxy settings)

I tried to create firewall rules in the LAN interface to send data to 3128 and 3129 but it doesn't work

The "setup Guest Network" is great but there is no clue there to make it work with proxy (the rule is in "all accessible mode") :(

So if someone have clues or ideas, I thank you in advance !
(and sorry for my english)
« Last Edit: November 03, 2017, 11:43:34 am by FCM »
Logged

FCM

  • Newbie
  • *
  • Posts: 40
  • Karma: 1
    • View Profile
Re: Captive Portal AND Proxy
« Reply #1 on: November 03, 2017, 01:50:16 pm »
Hello
Ok I have resolved, I think, my problem :

In the Firewall rules of my interface, I put 2 rules for HTTP and HTTPS and after them (??) I put 2 rules to send data to 3128 and 3129.

I have the portal working, and the proxy is doing its work, filtered URL are blocked...

I just don't understand how it works... if the rules for HTTP and HTTPS are before the redirection to the proxy port, they should work and be used, shouldn't they ?
(I add a picture of my rules in this post)
Logged

  • Print
Pages: [1]
« previous next »
  • OPNsense Forum »
  • Archive »
  • 17.7 Legacy Series »
  • Captive Portal AND Proxy
 

OPNsense is an OSS project © Deciso B.V. 2015 - 2023 All rights reserved
  • SMF 2.0.19 | SMF © 2021, Simple Machines
    Privacy Policy
    | XHTML | RSS | WAP2