Home
Help
Search
Login
Register
OPNsense Forum
»
Archive
»
17.7 Legacy Series
»
Can't access GUI via lan ip
« previous
next »
Print
Pages: [
1
]
Author
Topic: Can't access GUI via lan ip (Read 10912 times)
Kapman
Newbie
Posts: 9
Karma: 0
Can't access GUI via lan ip
«
on:
January 16, 2018, 03:58:23 am »
Hello everyone,
By mistake, I disabled my lan interface and locked myself out of OPNsense GUI as well as eliminating access to internet. SO I went to the console on the actual pc running OPNsense and re-assigned the the lan interface to the same IP address it was previously. The internet access came back, but I can no longer access to webgui via ip address. I can use a domain name on the lan (doesn't work when using the same domain external to the lan which is good), but not the ip. Does anyone know which setting I must change to gain access back using the ip address (192.168.1.1)?
Logged
cardins2u
Jr. Member
Posts: 71
Karma: 2
Re: Can't access GUI via lan ip
«
Reply #1 on:
January 16, 2018, 04:01:56 am »
If its a VM then open up esxi and reset the interfaces.
If its a physical box. Hook up a monitor and assign interfaces again. That should give you acess to the gui again.
Logged
Kapman
Newbie
Posts: 9
Karma: 0
Re: Can't access GUI via lan ip
«
Reply #2 on:
January 16, 2018, 04:10:42 am »
Thanks for the quick reply.
I did assign the lan interface, but that only gave me access to the GUI via a domain name. What must I do to get 192.168.1.1 to work instead? I plan on reusing the domain for another use.
Logged
cardins2u
Jr. Member
Posts: 71
Karma: 2
Re: Can't access GUI via lan ip
«
Reply #3 on:
January 16, 2018, 05:21:32 am »
go into SSH
change the ip of your lan interface That should enable the lan interface again and reset your ips.
Logged
Kapman
Newbie
Posts: 9
Karma: 0
Re: Can't access GUI via lan ip
«
Reply #4 on:
January 16, 2018, 06:26:06 am »
Thanks for the tip. I just tried that and while the ip does change successfully, I still can't access the webgui at that address. Is there a default when re-assigning that turns off access to the webgui over ip address?
Logged
Kapman
Newbie
Posts: 9
Karma: 0
Re: Can't access GUI via lan ip
«
Reply #5 on:
January 16, 2018, 06:29:30 am »
I also reloaded all services just in case it might help, still the same issue.
Logged
cardins2u
Jr. Member
Posts: 71
Karma: 2
Re: Can't access GUI via lan ip
«
Reply #6 on:
January 16, 2018, 07:04:19 am »
nope. it should be
http://192.168
.1.1 or
https://192.168
.1.1
did you try restarting opnsense. Sometimes in the past I had to restart it to even access it after changing ips.
Logged
Kapman
Newbie
Posts: 9
Karma: 0
Re: Can't access GUI via lan ip
«
Reply #7 on:
January 27, 2018, 09:52:26 pm »
I restarted, same issue. At this point is re-installation the best option?
Logged
Print
Pages: [
1
]
« previous
next »
OPNsense Forum
»
Archive
»
17.7 Legacy Series
»
Can't access GUI via lan ip