Unable to boot with USB 3 on APU2

[deviantintegral]

I have an APU2 running the apu2_160307 BIOS (I don't need PXE boot so I haven't bothered to upgrade). I'm unable to boot either 16.7 or 17.1 with a USB 3 stick (I've tried two separate ones). If I use a USB 2 stick in the USB 3 ports, it's fine. I am able to boot pfsense, though it throws a small number of similar CAM status errors. I thought set kern.cam.boot_delay was supposed to work around this, but it isn't for me. I've attached the boot logs. Since I haven't actually set up the router yet, if there's anything I can test out the next few days are best. Though, this totally seems like a FreeBSD and not opnsense issue.

(da0:umass-sim0:0:0:0): WRITE(10). CDB: 2a 00 00 00 00 10 00 00 10 00
(da0:umass-sim0:0:0:0): CAM status: CCB request completed with an error
(da0:umass-sim0:0:0:0): Retrying command

https://forum.opnsense.org/index.php?topic=3960.msg14176
https://forum.opnsense.org/index.php?topic=2327.msg7438

[franco]

Thanks for the report. Really unsure what to do here in the short term. I know over a dozen users have ran into this, but a real fix eludes us... whether this is UEFI or GPT or a mix of both for USB3. The i386 memstick images are non-UEFI while serial is always BSD label, vga is GPT.

Which pfSense version works for you here?


Cheers,
Franco

[deviantintegral]

It was pfSense-CE-memstick-serial-2.3.2-RELEASE-amd64.img.gz that was able to boot for me.