Home
Help
Search
Login
Register
OPNsense Forum
»
Archive
»
17.1 Legacy Series
»
[SOLVED] Outbound NAT not working?
« previous
next »
Print
Pages: [
1
]
Author
Topic: [SOLVED] Outbound NAT not working? (Read 6125 times)
labsy
Jr. Member
Posts: 59
Karma: 1
[SOLVED] Outbound NAT not working?
«
on:
May 23, 2017, 01:39:17 am »
Hi,
I have been struggling with setting up OUTBOUND traffic binding to different WAN IP aliases.
I own /28 subnet of Public IP addresses, which are all configured as VIRTUAL IPs on WAN adapter.
Now, I want to configure which LAN server or LAN subnet will use specific WAN IP alias for outgoing traffic. But without success. I've tried a lot, no results:
- Tried with OUTBOUND NAT, but no joy
- Created additional GATEWAYS for each WAN IP
- Created FLOATING firewall rule to use one of those gateways for OUT traffic....but no success
- followed some of this document, but no joy either:
https://docs.opnsense.org/manual/how-tos/multiwan.html?highlight=multi%20wan#step-4-policy-based-routing
Any idea what am I missing?
«
Last Edit: June 02, 2017, 12:55:14 am by labsy
»
Logged
labsy
Jr. Member
Posts: 59
Karma: 1
Re: Direct outbound traffic through different WAN IP aliases
«
Reply #1 on:
May 29, 2017, 07:57:09 pm »
Need to bump this, as properly setting up the outgoing WAN IP is essential for my mail server functionality.
Logged
labsy
Jr. Member
Posts: 59
Karma: 1
Re: Outbound NAT not working?
«
Reply #2 on:
June 02, 2017, 12:54:56 am »
Yesssssssss! Update to 17.1.8 solved the problem!
So to bind specific LAN outbound/egress traffic to specific WAN Virtual IP, simply use Outbound NAT and specify "Translated IP" as WAN Virtual IP.
Logged
Print
Pages: [
1
]
« previous
next »
OPNsense Forum
»
Archive
»
17.1 Legacy Series
»
[SOLVED] Outbound NAT not working?