Home
Help
Search
Login
Register
OPNsense Forum
»
Archive
»
16.7 Legacy Series
»
Ask for WAN settings.
« previous
next »
Print
Pages: [
1
]
Author
Topic: Ask for WAN settings. (Read 15291 times)
yut.sin1301
Newbie
Posts: 5
Karma: 0
Ask for WAN settings.
«
on:
September 28, 2017, 10:55:48 am »
Hi there
Multi WAN - what am I missing here ?
« on: January 17, 2017, 05:54:53 pm »
Quote
Scratching my head here.
Setup Multi WAN with 2 x WAN connections as per the docs.
What I can't figure out is what to do with setting (or not) the default gateway on a WAN.
Clearly you can only set a default route on one connection or the other. But I presume (though it is not mentioned) that this should be disabled for both WAN connections in a Multi WAN setup.
OK, so no default gateway and we add a rule to forward all local traffic to the gateway group.
From Opnsense I can ping the gateway monitor IPs and they traceroute out via each WAN device correctly.
From Opnsense I can ping the DNS servers set by the WAN routers and they traceroute out via each WAN device correctly.
For the life of me what I cannot do is ping any other host. I just get "No route to host"
That kind of makes sense - there are routes set for the DNS IPs and for the gateway monitor IPs but no other traffic so the packets should be picked up by the firewall rule but nothing happens.
Nothing appears in the firewall logs.
You can see the routes set for the Googler DNS servers used as gateway monitor IPs and you can see the DNS servers set by the ADSL routers
วิธีเล่นคาสิโนบนมือถือ
Internet:
Destination Gateway Flags Netif Expire
8.8.4.4 192.168.2.1 UGHS vtnet3
8.8.8.8 192.168.1.1 UGHS vtnet1
10.0.0.0/24 link#1 U vtnet0
10.0.0.251 link#1 UHS lo0
127.0.0.1 link#8 UH lo0
192.168.1.0/24 link#2 U vtnet1
192.168.1.11 link#2 UHS lo0
192.168.2.0/24 link#4 U vtnet3
192.168.2.11 link#4 UHS lo0
208.67.220.220 192.168.2.1 UGHS vtnet3
208.67.222.222 192.168.1.1 UGHS vtnet1
A traceroute to any of those 4 IPs shows the packets go the right way. But everything else is not getting picked up by the firewall/gateway group
So what on earth have I missed ? Do I still need to set a default gateway ?
Thank you for the advice.
Logged
Print
Pages: [
1
]
« previous
next »
OPNsense Forum
»
Archive
»
16.7 Legacy Series
»
Ask for WAN settings.