OPNsense
  • Home
  • Help
  • Search
  • Login
  • Register

  • OPNsense Forum »
  • Archive »
  • 15.1 Legacy Series »
  • [SOLVED] IPv6 Clients - Am I missing something?
« previous next »
  • Print
Pages: [1]

Author Topic: [SOLVED] IPv6 Clients - Am I missing something?  (Read 8041 times)

bcjenkins

  • Newbie
  • *
  • Posts: 24
  • Karma: 6
    • View Profile
[SOLVED] IPv6 Clients - Am I missing something?
« on: June 02, 2015, 05:18:12 pm »
Greetings,

I have an IPv6 address on my WAN (/64) adapter, and managed to get one assigned to my LAN (/128) adapter. My PCs and Mac are NOT receiving an IPv6 address and when executing a ping6 from the LAN interface, I receive a "No route to host" error.

I didn't see anything in the forums on a simple IPv6 setup, is there one?

Provider is TWC in the US.

--bcj
« Last Edit: June 07, 2015, 03:29:30 am by bcjenkins »
Logged

franco

  • Administrator
  • Hero Member
  • *****
  • Posts: 10084
  • Karma: 762
    • View Profile
Re: IPv6 Clients - Am I missing something?
« Reply #1 on: June 03, 2015, 09:46:22 pm »
Have you looked at these? It's hard to troubleshoot for providers, there are a lot of quirks around. :/

https://forum.pfsense.org/index.php?topic=86393.0
https://forum.pfsense.org/index.php?topic=92583.0
https://major.io/2014/09/11/howto-time-warner-cable-ipv6/


Cheers,
Franco
Logged

netrixtardis

  • Newbie
  • *
  • Posts: 11
  • Karma: 2
    • View Profile
Re: IPv6 Clients - Am I missing something?
« Reply #2 on: June 04, 2015, 05:27:53 am »
Use the following configuration:
for the WAN:
IPv6 Configuration Type:  DHCP6
DHCPv6 Prefix Delegation size:  64
Send IPv6 prefix hint:  Checked

NOTE:  Don't thing TWC cares about the last 2 options

for the LAN:
IPv6 Configuration Type:  Track Interface
Track IPv6 Interface > IPv6 Interface:  WAN

Reboot router.
End.

For me, this allows my router to get a /128 for WAN, create a /64 for LAN, and Dole out IPv6 IPs to clients.
Logged

bcjenkins

  • Newbie
  • *
  • Posts: 24
  • Karma: 6
    • View Profile
Re: IPv6 Clients - Am I missing something?
« Reply #3 on: June 07, 2015, 03:16:15 am »
Thank you both for the comments. The issue as it turns out was unrelated to my OpnSense router and was instead related to my Aruba IAP-225 WAP at the house. The Aruba needs to have broadcast-filtering set to "None" for the SSID. (Source) I was able to isolate when I tested on a wire.

The settings I am using are below. The DNS is being provided by OpenDNS.

WAN Configuration:
IPv6 Configuration Type: DHCP6
DHCPv6 Prefix Delegation size: 56
Send IPv6 prefix hint: Checked

LAN Configuration:
IPv6 Configuration Type: Track Interface
Track IPv6 Interface -> IPv6 Interface: WAN

System -> Settings -> DNS Servers
208.67.222.222 - Set to WAN IPv4
208.67.220.220 - Set to WAN IPv4
2620:0:ccc::2 - Set to WAN IPv6
2620:0:ccd::2 - Set to WAN IPv6

Firewall -> Rules
Add WAN rule to allow IPv6 ICMP echoreq
« Last Edit: June 07, 2015, 03:31:26 am by bcjenkins »
Logged

  • Print
Pages: [1]
« previous next »
  • OPNsense Forum »
  • Archive »
  • 15.1 Legacy Series »
  • [SOLVED] IPv6 Clients - Am I missing something?
 

OPNsense is an OSS project © Deciso B.V. 2015 - 2021 All rights reserved
  • SMF 2.0.17 | SMF © 2019, Simple Machines
    Privacy Policy
    | XHTML | RSS | WAP2