Portforwarding Tablo DVR -- Help!

[zanib]

Using the setup guide found here: https://support.tablotv.com/hc/en-us/articles/115005962283-Tablo-Connect-and-Port-Forwarding

I attempted to create port forwarding rules so I will be able to access my Tablo DVR from outside my home network.

I initially created two rules under port forwarding that set the destination port ranges to the public port given by my tablo and the redirect port range set to the private ports given by my tablo. However, I have no success getting a connection outside my home network.



I also tried several port combinations within the rules but nothing seems to work.

Essentially I am trying to create two rules that do the following:

Public Port 21010 forwards to Private Port 80 at 192.168.XXX.XXX (Tablo's IP address) using TCP protocol

Public Port 21011 forwards to Private Port 8887 at 192.168.XXX.XXX (Tablo's IP address) using TCP protocol

Any help is appreciated!!!

[zanib]

I figured it out! My Fios router was blocking the ports. I put my router's ip into the DMZ on the fios router and all port rules forwarding worked!