how to delete an entry from: Firewall => Diagnostics => pfTables

Started by gonzo, March 01, 2018, 09:56:37 AM

Previous topic - Next topic
Print
Go Down Pages 1 2
User actions
March 05, 2018, 10:16:10 AM #15
I'm not sure why. Which bad side-effect does the lingering table have on your end?
March 05, 2018, 10:23:25 AM #16
Franco, I do not want to take your precious time. Perhaps this is just a matter of aesthetics. On Wednesday, around 7am, I planned a firewall reboot. I'll let you know if everything worked out. Thank you very much for your help and time. :)
March 05, 2018, 10:28:42 AM #17
I'm being persistent for a reason:

If the table not being deleted immediately causes a problem in your operational setup it's something we should know because that makes a fix here valuable.

Just want to make sure we don't miss this opportunity.


Cheers,
Franco
March 05, 2018, 10:37:51 AM #18

OK, I will restart the firewall on Wednesday at 7 am, I will write to this post immediately.
March 05, 2018, 03:06:03 PM #19
You could always backup the configuration and restore to a fresh install. That's what I do when things get too messy. Only takes about 15 minutes or less.
March 05, 2018, 09:34:58 PM #20
Maybe you could upgrade/update/reboot outside of the working hours?
OPNsense v18 | HW: Gigabyte Z370N-WIFI, i3-8100, 8GB RAM, 60GB SSD, | Controllers: 82575GB-quad, 82574, I221, I219-V | PPPoE: RDS Romania | Down: 980Mbit/s | Up: 500Mbit/s

Team Rebellion Member
March 06, 2018, 08:49:05 PM #21

servers work around the clock. I planned a firewall reboot tomorrow at around 7 am.
March 07, 2018, 07:31:43 AM #22

After firewall reboot, "my" entries in pfTables have been removed. I made an update to the latest version 18.1.3.

It's like Franco said, thank you very much for your help.
Print
Go Up Pages 1 2
User actions