Home
Help
Search
Login
Register
OPNsense Forum
»
Archive
»
17.7 Legacy Series
»
Route all traffic through IPsec VPN
« previous
next »
Print
Pages: [
1
]
Author
Topic: Route all traffic through IPsec VPN (Read 5451 times)
lambrusco
Newbie
Posts: 11
Karma: 0
Route all traffic through IPsec VPN
«
on:
January 12, 2018, 06:19:03 pm »
Hi all, I followed the How to guide for configuring an IPsec Road-Warrior VPN to connect my home network from outside and I'm now able to access my local network.
What I would like to do now is having the possibility to route all the internet traffic from my laptop trough my home connection.
I created the following firewall rules
And when I try to navigate I see in the logs that the rule is triggered
Despite the firewall rules working I cannot connect outside the LAN.
Those are the automatic generates NAT rules:
Does anyone has a suggestion on where it could be the issue?
Thanks!
Logged
bartjsmit
Hero Member
Posts: 1942
Karma: 193
Re: Route all traffic through IPsec VPN
«
Reply #1 on:
January 12, 2018, 09:10:18 pm »
Does OPNsense hold your public IP on the WAN interface? If you use a private IP on the WAN side, you'll need to put a static route on your next (ISP) router for the tunnel network and any networks on the far side.
Bart...
Logged
lambrusco
Newbie
Posts: 11
Karma: 0
Re: Route all traffic through IPsec VPN
«
Reply #2 on:
January 13, 2018, 09:06:46 pm »
Hi Bart,
thanks for the answer.
WAN interface has a local IP on a private network 192.168.100.0/24 but gets the public IP via PPPoE
here are my automatic routes (The obscured one is the public IP):
Logged
lambrusco
Newbie
Posts: 11
Karma: 0
Re: Route all traffic through IPsec VPN
«
Reply #3 on:
January 24, 2018, 06:05:01 am »
Does anyone can help?
Thanks!
Logged
Print
Pages: [
1
]
« previous
next »
OPNsense Forum
»
Archive
»
17.7 Legacy Series
»
Route all traffic through IPsec VPN