Home
Help
Search
Login
Register
OPNsense Forum
»
Archive
»
17.7 Legacy Series
»
[BUG] openvpn rule pass connect.
« previous
next »
Print
Pages: [
1
]
Author
Topic: [BUG] openvpn rule pass connect. (Read 3783 times)
huukiller
Newbie
Posts: 6
Karma: 0
[BUG] openvpn rule pass connect.
«
on:
October 15, 2017, 07:41:05 pm »
openvpn only connects when I create a floating rule releasing everything, the rule created by openvpn wizard does not work, even releasing all traffic on all interfaces opnsense continues giving timeout, only when I apply the rule in floating.
openvpn 2.4.4. en last version opnsense.
I have done several tests to release all traffic for all interfaces, and no matter how I configure, the vpn client of opnevpn only connects when the same rule created automatically by the opnevpn wizard and recreated in floating, is bug?
Logged
robvh
Newbie
Posts: 10
Karma: 2
Re: [BUG] openvpn rule pass connect.
«
Reply #1 on:
October 16, 2017, 09:03:46 am »
Here is a cookbook how to get it going:
https://forum.opnsense.org/index.php?topic=4979
You could check the firewall log to see which IP address and port failed. When I did my first install, openvpn could not resolve the name of the server.
«
Last Edit: October 16, 2017, 09:08:09 am by robvh
»
Logged
huukiller
Newbie
Posts: 6
Karma: 0
Re: [BUG] openvpn rule pass connect.
«
Reply #2 on:
October 18, 2017, 01:08:47 am »
With these firewall rules openvpn does not connect, from the timeout, but when I put the same very restrictive rule on the floating tule I can connect to vpn and access from wan to lan normally, it's not a route problem, I work with pfsense, and I never needed it use floating rule to use openvpn.
in the attached image, when I use these rules in opnevpn, lan and wan, does not connect, when I apply the same rule of wan in floating connect normally, my question would be, because when I put the same rule in floating I connect with it, being exactly the same rule in wan.
obs: 192.168.0.3 = wan address
«
Last Edit: October 18, 2017, 01:10:38 am by huukiller
»
Logged
huukiller
Newbie
Posts: 6
Karma: 0
Re: [BUG] openvpn rule pass connect.
«
Reply #3 on:
October 20, 2017, 12:36:49 am »
Another thing is that when I use a wizard to create an openvpn rule, it creates a rule automatically in WAN, this rule does not work, it is only copied to FLOATING, and this rule is created automatically in the legend is set in direction in , but the option of direction of traffic in / out, it is only possible to configure in FLOATING, I found it strange
Logged
Print
Pages: [
1
]
« previous
next »
OPNsense Forum
»
Archive
»
17.7 Legacy Series
»
[BUG] openvpn rule pass connect.