Home
Help
Search
Login
Register
OPNsense Forum
»
Archive
»
17.7 Legacy Series
»
Traffic shaping in Bridged mode
« previous
next »
Print
Pages: [
1
]
Author
Topic: Traffic shaping in Bridged mode (Read 3793 times)
Enrico
Newbie
Posts: 2
Karma: 0
Traffic shaping in Bridged mode
«
on:
September 15, 2017, 01:00:07 pm »
Hi Everyone,
I'm having this problem with V17.7.1_2 (but I also had the same on V17.1).
My setup is as follow:
[WAN interface] ---- [Bridge] ---- [LAN interface]
WAN, Bridge and LAN are all without an address and I'm using a dedicated interface to manage the system.
I set up tunables as follow:
net.link.bridge.pfil_bridge=0
net.link.bridge.ipfw=1
net.link.ether.ipfw=1
Everything work perfectly until I reboot the system.
When the system come back online the settings in Tunables are not automatically applied and I need to manually apply them to get shaping working again.
I did even try to put:
net.link.bridge.pfil_bridge=0
net.link.bridge.ipfw=1
net.link.ether.ipfw=1
into /etc/sysctl.conf but they do not seems to be loaded at system boot.
This is the output I get when I manually apply the sysctl after system boot
# sysctl -f /etc/sysctl.conf
# net.link.bridge.ipfw: 1 -> 1
# net.link.ether.ipfw: 0 -> 1
# net.link.bridge.pfil_bridge: 0 -> 0
and shaping works again.
Any idea?
Thanks.
Regards,
Enrico
Logged
Print
Pages: [
1
]
« previous
next »
OPNsense Forum
»
Archive
»
17.7 Legacy Series
»
Traffic shaping in Bridged mode