Can't start OPNsense on pcengines (APU 2GB) Board

Archive > 15.1 Legacy Series

(1/1)

jstrebel:
Hi,
tried to boot OPNsense-15.1.5-memstick-serial-amd64.img.bz on my pcengines APU board. The system hangs (see the attached log.
I have tried the following:
- booting from the USB
- booting from the internal mSATA
- (A)CPI to off
- Safe mode to on
Comment: pfsense 2.2 with FreeBSD 10.1 works.

Do you have any suggestions how I can bring the box up?
(my apology for adding the log in the posting. Either Safari nor chrome allowed me to attach the logfile)
Thank you in advance
Jakob

Booting...
KDB: debugger backends: ddb
KDB: current backend: ddb
SMAP type=01 base=0000000000000000 len=000000000009fc00
SMAP type=02 base=000000000009fc00 len=0000000000000400
SMAP type=02 base=00000000000f0000 len=0000000000010000
SMAP type=01 base=0000000000100000 len=000000007e06ec00
SMAP type=02 base=000000007e16ec00 len=0000000000e91000
SMAP type=02 base=00000000f8000000 len=0000000001000000
Table 'FACP' at 0x7e173a20
Table 'HPET' at 0x7e173b18
Table 'APIC' at 0x7e173b50
APIC: Found table at 0x7e173b50
APIC: Using the MADT enumerator.
MADT: Found CPU APIC ID 0 ACPI ID 0: enabled
SMP: Added CPU 0 (AP)
MADT: Found CPU APIC ID 1 ACPI ID 1: enabled
SMP: Added CPU 1 (AP)
Copyright (c) 1992-2014 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 10.0-RELEASE-p17 #0 a96e74a(master): Sat Jan 31 08:19:14 CET 2015
root@sensey:/usr/obj/usr/src/sys/SMP amd64
FreeBSD clang version 3.3 (tags/RELEASE_33/final 183502) 20130610
Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff81f9e000.
Calibrating TSC clock ... TSC clock: 1000022205 Hz
CPU: AMD G-T40E Processor (1000.02-MHz K8-class CPU)
Origin = "AuthenticAMD" Id = 0x500f20 Family = 0x14 Model = 0x2 Stepping = 0
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x802209<SSE3,MON,SSSE3,CX16,POPCNT>
AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM>
AMD Features2=0x35ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,IBS,SKINIT,WDT>
TSC: P-state invariant, performance statistics
L1 2MB data TLB: 8 entries, fully associative
L1 2MB instruction TLB: 8 entries, fully associative
L1 4KB data TLB: 40 entries, fully associative
L1 4KB instruction TLB: 0 entries, 0-way associative
L1 data cache: 32 kbytes, 64 bytes/line, 1 lines/tag, 8-way associative
L1 instruction cache: 32 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L2 2MB unified TLB: 0 entries, disabled/not present
L2 4KB data TLB: 512 entries, 4-way associative
L2 4KB instruction TLB: 512 entries, 4-way associative
L2 unified cache: 512 kbytes, 64 bytes/line, 1 lines/tag, 16-way associative
real memory = 2115428352 (2017 MB)
Physical memory chunk(s):
0x0000000000010000 - 0x000000000009bfff, 573440 bytes (140 pages)
0x0000000000100000 - 0x00000000001fffff, 1048576 bytes (256 pages)
0x0000000001fc8000 - 0x000000007adbcfff, 2027900928 bytes (495093 pages)
avail memory = 2012897280 (1919 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <CORE COREBOOT>
INTR: Adding local APIC 1 as a target
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
APIC: CPU 0 has ACPI ID 0
APIC: CPU 1 has ACPI ID 1
x86bios: IVT 0x000000-0x0004ff at 0xfffff80000000000
x86bios: SSEG 0x098000-0x098fff at 0xfffffe0079bf6000
x86bios: EBDA 0x09f000-0x09ffff at 0xfffff8000009f000
x86bios: ROM 0x0a0000-0x0fefff at 0xfffff800000a0000
XEN: CPU 0 has VCPU ID 0
XEN: CPU 1 has VCPU ID 1
random device not loaded; using insecure entropy
ULE: setup cpu 0
ULE: setup cpu 1
ACPI: RSDP 0xfd9f0 00014 (v00 CORE )
ACPI: RSDT 0x7e171024 00040 (v01 CORE COREBOOT 00000000 CORE 00000000)
ACPI: FACP 0x7e173a20 000F4 (v04 CORE COREBOOT 00000000 CORE 00000000)
ACPI: DSDT 0x7e1710c8 02915 (v02 PCENG APU 00010001 INTL 20121114)
ACPI: FACS 0x7e1739e0 00040
ACPI: HPET 0x7e173b18 00038 (v01 CORE COREBOOT 00000000 CORE 00000000)
ACPI: APIC 0x7e173b50 0005C (v01 CORE COREBOOT 00000000 CORE 00000000)
ACPI: HEST 0x7e173bb0 00198 (v01 CORE COREBOOT 00000000 CORE 00000000)
ACPI: SSDT 0x7e173d50 0168E (v02 AMD ALIB 00000001 MSFT 04000000)
ACPI: SSDT 0x7e1753e0 0030C (v01 AMD POWERNOW 00000001 AMD 00000001)
ACPI: SSDT 0x7e1756f0 00045 (v02 CORE COREBOOT 0000002A CORE 0000002A)
MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000
ioapic0: Routing external 8259A's -> intpin 0
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
ioapic0: intpin 9 polarity: low
ioapic0 <Version 2.1> irqs 0-23 on motherboard
cpu0 BSP:
ID: 0x00000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000300ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
firmware: 'iwn6050fw' version 0: 469780 bytes loaded at 0xffffffff81803cf4
ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_bss_fw, 0xffffffff805b9a70, 0) error 1
ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_ibss_fw, 0xffffffff805b9b20, 0) error 1
ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_monitor_fw, 0xffffffff805b9bd0, 0) error 1
firmware: 'iwn1000fw' version 0: 337520 bytes loaded at 0xffffffff81591b84
firmware: 'wpifw' version 153229: 150100 bytes loaded at 0xffffffff81987f24
firmware: 'mw88W8363fw' version 0: 94940 bytes loaded at 0xffffffff8188078c
firmware: 'mwlboot' version 0: 2280 bytes loaded at 0xffffffff81897a68
firmware: 'mxge_eth_z8e' version 377284: 120629 bytes loaded at 0xffffffff81898520
firmware: 'mxge_ethp_z8e' version 387604: 121317 bytes loaded at 0xffffffff818b5d10
firmware: 'mxge_rss_eth_z8e' version 534724: 151912 bytes loaded at 0xffffffff818d37b0
firmware: 'mxge_rss_ethp_z8e' version 544468: 152837 bytes loaded at 0xffffffff818f89d0
firmware: 'rt2561fw' version 0: 8192 bytes loaded at 0xffffffff81921b9c
firmware: 'rt2561sfw' version 0: 8192 bytes loaded at 0xffffffff81923c4c
firmware: 'rt2661fw' version 0: 8192 bytes loaded at 0xffffffff81925cfc
snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024]
feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=5 feeder_rate_min=1 feeder_rate_max=2016000 feeder_rate_round=25
firmware: 'rt2860fw' version 0: 8192 bytes loaded at 0xffffffff81927dac
firmware: 'iwn4965fw' version 0: 187972 bytes loaded at 0xffffffff815e42a4
firmware: 'iwn5000fw' version 0: 340696 bytes loaded at 0xffffffff81612194
firmware: 'iwn5150fw' version 0: 337400 bytes loaded at 0xffffffff8166551c
wlan: mac acl policy registered
firmware: 'iwn6000fw' version 0: 454608 bytes loaded at 0xffffffff816b7bc4
firmware: 'iwn6000g2afw' version 0: 444128 bytes loaded at 0xffffffff81726c44
firmware: 'iwn6000g2bfw' version 0: 460912 bytes loaded at 0xffffffff817933d4
wlan: <802.11 Link Layer>
Hardware, Intel IvyBridge+ RNG: RDRAND is not present
Hardware, VIA Nehemiah Padlock RNG: VIA Padlock RNG not present
null: <null device, zero device>
Falling back to <Software, Yarrow> random adaptor
random: <Software, Yarrow> initialized
nfslock: pseudo-device
crypto: <crypto core>
kbd0 at kbdmux0
mem: <memory>
module_register_init: MOD_LOAD (vesa, 0xffffffff80e97d00, 0) error 19
io: <I/O>
VMBUS: load
hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2
hptnr: R750/DC7280 controller driver v1.0
hpt27xx: RocketRAID 27xx controller driver v1.1
cryptosoft0: <software crypto> on motherboard
crypto: assign cryptosoft0 driver id 0, flags 100663296
crypto: cryptosoft0 registers alg 1 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 2 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 3 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 4 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 5 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 16 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 6 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 7 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 18 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 19 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 20 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 8 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 15 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 9 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 10 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 13 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 14 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 11 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 22 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 21 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 17 flags 0 maxoplen 0
padlock0: No ACE support.
acpi0: <CORE COREBOOT> on motherboard
ACPI: All ACPI Tables successfully acquired
ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48
ACPI: Executed 2 blocks of module-level executable AML code
acpi0: Power Button (fixed)
cpu0: Processor \_PR_.C000 (ACPI ID 0) -> APIC ID 0
cpu0: <ACPI CPU> on acpi0
cpu1: Processor \_PR_.C001 (ACPI ID 1) -> APIC ID 1
cpu1: <ACPI CPU> on acpi0
ACPI: Processor \_PR_.C002 (ACPI ID 2) ignored
ACPI: Processor \_PR_.C003 (ACPI ID 3) ignored
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atrtc0: registered as a time-of-day clock (resolution 1000000us, adjustment 0.500000000s)
ioapic0: routing intpin 8 (ISA IRQ 8) to lapic 0 vector 49
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
ioapic0: routing intpin 2 (ISA IRQ 0) to lapic 0 vector 50
Event timer "i8254" frequency 1193182 Hz quality 100
ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
device_attach: hpet0 attach returned 12
pci_link0: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 7 10 11 12 15
Validation 0 255 N 0 3 4 5 7 10 11 12 15
After Disable 0 255 N 0 3 4 5 7 10 11 12 15
pci_link1: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 7 10 11 12 15
Validation 0 255 N 0 3 4 5 7 10 11 12 15
After Disable 0 255 N 0 3 4 5 7 10 11 12 15
pci_link2: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 7 10 11 12 15
Validation 0 255 N 0 3 4 5 7 10 11 12 15
After Disable 0 255 N 0 3 4 5 7 10 11 12 15
pci_link3: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 7 10 11 12 15
Validation 0 255 N 0 3 4 5 7 10 11 12 15
After Disable 0 255 N 0 3 4 5 7 10 11 12 15
pci_link4: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 7 10 11 12 15
Validation 0 255 N 0 3 4 5 7 10 11 12 15
After Disable 0 255 N 0 3 4 5 7 10 11 12 15
pci_link5: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 9
Validation 0 255 N 0 9
After Disable 0 255 N 0 9
pci_link6: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 7 10 11 12 15
Validation 0 255 N 0 3 4 5 7 10 11 12 15
After Disable 0 255 N 0 3 4 5 7 10 11 12 15
pci_link7: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 7 10 11 12 15
Validation 0 255 N 0 3 4 5 7 10 11 12 15
After Disable 0 255 N 0 3 4 5 7 10 11 12 15
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff iomem 0xa0000-0xbffff,0x7f000000-0xffffffff on acpi0
pcib0: decoding 4 range 0-0xcf7
pcib0: decoding 4 range 0xd00-0xffff
pci0: <ACPI PCI bus> on pcib0
pci0: domain=0, physical bus=0
found-> vendor=0x1022, dev=0x1510, revid=0x00
domain=0, bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0220, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1512, revid=0x00
domain=0, bus=0, slot=4, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
powerspec 3 supports D0 D3 current D0
MSI supports 1 message, 64 bit
found-> vendor=0x1022, dev=0x1513, revid=0x00
domain=0, bus=0, slot=5, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
powerspec 3 supports D0 D3 current D0
MSI supports 1 message, 64 bit
found-> vendor=0x1022, dev=0x1514, revid=0x00
domain=0, bus=0, slot=6, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
powerspec 3 supports D0 D3 current D0
MSI supports 1 message, 64 bit
found-> vendor=0x1002, dev=0x4391, revid=0x40
domain=0, bus=0, slot=17, func=0
class=01-06-01, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0230, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
map[10]: type I/O Port, range 32, base 0x4020, size 3, enabled
pcib0: allocated type 4 (0x4020-0x4027) for rid 10 of pci0:0:17:0
map[14]: type I/O Port, range 32, base 0x4040, size 2, enabled
pcib0: allocated type 4 (0x4040-0x4043) for rid 14 of pci0:0:17:0
map[18]: type I/O Port, range 32, base 0x4028, size 3, enabled
pcib0: allocated type 4 (0x4028-0x402f) for rid 18 of pci0:0:17:0
map[1c]: type I/O Port, range 32, base 0x4044, size 2, enabled
pcib0: allocated type 4 (0x4044-0x4047) for rid 1c of pci0:0:17:0
map[20]: type I/O Port, range 32, base 0x4000, size 4, enabled
pcib0: allocated type 4 (0x4000-0x400f) for rid 20 of pci0:0:17:0
map[24]: type Memory, range 32, base 0xfeb08000, size 10, enabled
pci0: pci0:0:17:0 bar 0x24 failed to allocate
found-> vendor=0x1002, dev=0x4397, revid=0x00
domain=0, bus=0, slot=18, func=0
class=0c-03-10, hdrtype=0x00, mfdev=1
cmdreg=0x0002, statreg=0x02a0, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
map[10]: type Memory, range 32, base 0xfeb04000, size 12, enabled
pci0: pci0:0:18:0 bar 0x10 failed to allocate
unknown: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0x100000000
ohci early: SMM active, request owner change
ohci early: SMM does not respond, resetting
found-> vendor=0x1002, dev=0x4396, revid=0x00
domain=0, bus=0, slot=18, func=2
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x02b0, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=255
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type Memory, range 32, base 0xfeb08400, size 8, enabled
pci0: pci0:0:18:2 bar 0x10 failed to allocate
unknown: Lazy allocation of 0x100 bytes rid 0x10 type 3 at 0x100001000

franco:
Well, it's the kernel so that is either some hints/loader config foo missing or FreeBSD 10.0. I will send you a link to the FreeBSD 10.1 test snapshot via PM to try. It would be good to confirm which one it is. :)

Edit: The issue is indeed fixed with FreeBSD 10.1.

Navigation

[0] Message Index

Go to full version