Interfaces 2.5gbe and 10gb

[Hemhems]

Hello

I have a qotom 1u baremetal opnsense (5*2.5gbe rj45 4*sfp+). With igc 4 as WAN and igc 2 as LAN. I have tried multiple times to add all interfaces to One sfp+ after final config, it won't save and eventually resets my config. I have now got a "working" config with the use of 2 ports, LAN and vlan99 on icg2 and 4 other vlans on ix0 (sfp+). Why can't i get just one sfp+ with all interfaces to work - what am i doing wrong?

[lilsense]

are you trying to create a port channel? if so, you need to create a bridge 1st.

[Patrick M. Hausen]

Port channel is LACP/LAGG, not bridge. But yes, the OP needs to be a bit more specific about what they mean by "add all interfaces to one SFP+".

[Hemhems]

I wanted to use 1 trunk 10gb sfp+ but my opnsense config bricked when moving all vlans 10-99 and lan, and used igc2 for the initial setup. So i used no lagg and no brigde and used 2 trunk interfaces to my mikrotik crs328. Igc2 with LAN and vlan 99, and 10gb sfp+ with vlan 10-20-30-40. I have no mgmt vlan access to my AP. So i think i need just 1 trunk, preferable sfp+ ix0...