[Solved]Multi WAN Configuration - No navigation

[z4ratustra]

Good Morning,
I set the Multi WAN / Failover using the Setup Multi WAN documentation after deployment navigation just stopped, I can usually ping IP and hosts but when I open the browser pages simply will not charge.
https://uploaddeimagens.com.br/images/000/741/072/original/Teste_ICMP.jpg
https://uploaddeimagens.com.br/images/000/741/075/original/TCP_Dump.jpg
https://uploaddeimagens.com.br/images/000/741/077/original/Rules.jpg


Obs: sorry for bad English, I'm using google translate rsrs

[z4ratustra]

I found that by disabling the transparent proxy and the rules the same, navigation back to normal, it would be something to that effect?

[franco]

Hi Carlos,

Multi-WAN has kernel issues we're attempting to fix, it is likely related to this. I'm working with FreeBSD on the matter and we hope to fix this for our 17.1 release.

The current state of the fix is below, but it's not working reliably at this point:

https://github.com/opnsense/src/commit/03fab4b7901

But we'll get there.


Cheers,
Franco

PS: Don't worry about language. :)

[z4ratustra]

Good morning Franco,
Thanks for the information, so I will have to postpone the implementation of the firewall, I am currently using it for testing, so keep up the release of the new version.

Cheers  :D

[z4ratustra]

Hi Carlos,

Multi-WAN has kernel issues we're attempting to fix, it is likely related to this. I'm working with FreeBSD on the matter and we hope to fix this for our 17.1 release.

The current state of the fix is below, but it's not working reliably at this point:

https://github.com/opnsense/src/commit/03fab4b7901

But we'll get there.


Cheers,
Franco

PS: Don't worry about language. :)

Do you have a sense of time for completion of the correction?  :)

[franco]

I'm hoping to get this done by early November.

[z4ratustra]

Thanx _/\_
;)

[z4ratustra]

Hello,
I'm testing version 17.1b and checked that the reported problem still persists, any prediction for the fix? Otherwise I will have to go to another solution and it is not what I wanted.  :(

[Julien]

Hello,
I'm testing version 17.1b and checked that the reported problem still persists, any prediction for the fix? Otherwise I will have to go to another solution and it is not what I wanted.  :(

i am having the same issue and the multi wan has never worked,
hoping with the 17.1 will fix it,
i am waiting for the new release too.

[franco]

17.1.r1 will have the fix. It is scheduled for release this Friday.


Cheers,
Franco

[z4ratustra]

Thanks Franco!!  ;D