English Forums > Hardware and Performance

25GB Opnsense Newbie

(1/3) > >>

cryoplay:
Hi there.

Im an absolute Newbie in Linux / BSD / Opnsense, so please dont bite me.

Ive got a 25GB/s symetrical Fiber connection from my ISP and i tried to make an Opnsense Router because i doenst find a payable Router that can handle at least 15GB/s....

I have build a Test System:

Intel 9900
32GB Ram
Samsung nvme 1tb
Intel xxv710-DA2 NIC

Setting up opnsense and my Speeds are about 7GBs Down and 3GBs up.
I tried different tuneables but... im not sure if i make it right.

Can someone help and explain me how to find the Problem and solve it?

lilsense:
Are you testing your speed from the test system? is that the OPNsense router?

cryoplay:
Im testing it from a computer in the lan to speedtest.net.
Speedtest Server is the one from the ISP.

Managed to install Speedtest on the Opnsense Box.
CLI SSH testing:
Speedtest by Ookla

      Server: Init7 AG - Winterthur (id: 43030)
         ISP: Init7 (Switzerland) Ltd.
Idle Latency:     0.87 ms   (jitter: 0.03ms, low: 0.84ms, high: 0.93ms)
    Download:  8876.95 Mbps (data used: 5.3 GB)                                 
                  3.56 ms   (jitter: 1.50ms, low: 0.59ms, high: 18.97ms)
      Upload: 17889.00 Mbps (data used: 23.7 GB)                               
                  0.73 ms   (jitter: 0.37ms, low: 0.56ms, high: 6.20ms)
 Packet Loss:     0.0%

lilsense:
Are you able to see speed test at around 25Gbps speed without the OPNsense? If so, have you turned off Zenarmour/Sensei/IDS/IPS for the testing purpose?

cryoplay:
Thank you for your reply.

I only see 25 Gb/s when i direct connect my Computer to the Fiber connection.
Without the opnsense box between.

Im not sure how i can turn off Zenarmour ( deinstal it? ).

I also found a Thread with a similar Problem.
https://forum.opnsense.org/index.php?topic=24302.0

My nic isnt at the latest firmware but i dont managed to update it.

Regards

Navigation

[0] Message Index

[#] Next page