radiusd -X(12) eap_peap: ERROR: (TLS) Alert read:fatal:access denied(12) eap_peap: ERROR: (TLS) Error in fragmentation logic - code 1(12) eap_peap: ERROR: (TLS) Failed reading application data from OpenSSL: error:14094419:SSL routines:ssl3_read_bytes:tlsv1 alert access denied(12) eap_peap: ERROR: [eaptls process] = fail(12) eap: ERROR: Failed continuing EAP PEAP (25) session. EAP sub-module failed
Since chemlud mentions it:3.0.22 update saidThe default minimum TLS version is now TLS 1.2, as per RFC 8996 Older versions can be allowed by setting tls_min_version, and updating "cipher_list".Cheers,Franco
pkg add -f https://pkg.opnsense.org/FreeBSD:12:amd64/21.1/MINT/21.1.6/OpenSSL/All/freeradius3-3.0.21_2.txzFetching freeradius3-3.0.21_2.txz: 100% 1 MiB 1.3MB/s 00:01Installing freeradius3-3.0.21_2...package freeradius3 is already installed, forced installpkg: Missing dependency 'openldap-sasl-client'Failed to install the following 1 package(s): https://pkg.opnsense.org/FreeBSD:12:amd64/21.1/MINT/21.1.6/OpenSSL/All/freeradius3-3.0.21_2.txz
tls_min_version = "1.0"tls_max_version = "1.2"cipher_list = "DEFAULT@SECLEVEL=1"
(6) eap: Peer sent packet with method EAP PEAP (25)(6) eap: Calling submodule eap_peap to process data(6) eap_peap: (TLS) EAP Peer says that the final record size will be 31 bytes(6) eap_peap: (TLS) EAP Got all data (31 bytes)(6) eap_peap: (TLS) recv TLS 1.2 Alert, fatal access_denied(6) eap_peap: ERROR: (TLS) Alert read:fatal:access denied(6) eap_peap: ERROR: (TLS) Error in fragmentation logic - code 1(6) eap_peap: ERROR: (TLS) Failed reading application data from OpenSSL: error:14094419:SSL routines:ssl3_read_bytes:tlsv1 alert access denied(6) eap_peap: ERROR: [eaptls process] = fail(6) eap: ERROR: Failed continuing EAP PEAP (25) session. EAP sub-module failed
pkg add -f https://pkg.opnsense.org/FreeBSD:12:amd64/21.1/MINT/21.1.6/OpenSSL/All/openldap-sasl-client-2.4.58.txz
Starting - reading configuration files ...####READING files#####main { security { allow_core_dumps = no } name = "radiusd" prefix = "/usr/local" localstatedir = "/var" logdir = "/var/log" run_dir = "/var/run/radiusd"}main { name = "radiusd" prefix = "/usr/local" localstatedir = "/var" sbindir = "/usr/local/sbin" logdir = "/var/log" run_dir = "/var/run/radiusd" libdir = "/usr/local/lib/freeradius-3*" radacctdir = "/var/log/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 16384 postauth_client_lost = no pidfile = "/var/run/radiusd/radiusd.pid" checkrad = "/usr/local/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = yes auth_badpass = yes auth_goodpass = yes colourise = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 200 reject_delay = 1.000000 status_server = yes }}radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = ####IP-Address#### port = 1812 type = "auth" secret = <<< secret >>> response_window = 20.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 120 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { }radiusd: #### Loading Clients #### client WLAN { ipaddr = ####IP-Address####/24 require_message_authenticator = no secret = <<< secret >>> shortname = "WLAN" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } }Debugger not attached # Creating Auth-Type = mschap # Creating Auth-Type = eap # Creating Auth-Type = PAP # Creating Auth-Type = CHAP # Creating Auth-Type = MS-CHAP # Creating Auth-Type = digestradiusd: #### Instantiating modules #### modules { # Loaded module rlm_eap # Loading module "eap" from file /usr/local/etc/raddb/mods-enabled/eap eap { default_eap_type = "mschapv2" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 16384 } # Loaded module rlm_digest # Loading module "digest" from file /usr/local/etc/raddb/mods-enabled/digest # Loaded module rlm_utf8 # Loading module "utf8" from file /usr/local/etc/raddb/mods-enabled/utf8 # Loaded module rlm_pap # Loading module "pap" from file /usr/local/etc/raddb/mods-enabled/pap pap { normalise = yes } # Loaded module rlm_cache # Loading module "cache_eap" from file /usr/local/etc/raddb/mods-enabled/cache_eap cache cache_eap { driver = "rlm_cache_rbtree" key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}" ttl = 15 max_entries = 0 epoch = 0 add_stats = no } # Loaded module rlm_attr_filter # Loading module "attr_filter.post-proxy" from file /usr/local/etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/usr/local/etc/raddb/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.pre-proxy" from file /usr/local/etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/usr/local/etc/raddb/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.access_reject" from file /usr/local/etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/usr/local/etc/raddb/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.access_challenge" from file /usr/local/etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/usr/local/etc/raddb/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.accounting_response" from file /usr/local/etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/usr/local/etc/raddb/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.coa" from file /usr/local/etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.coa { filename = "/usr/local/etc/raddb/mods-config/attr_filter/coa" key = "%{User-Name}" relaxed = no } # Loaded module rlm_mschap # Loading module "mschap" from file /usr/local/etc/raddb/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes passchange { } allow_retry = yes winbind_retry_with_normalised_username = no } # Loaded module rlm_linelog # Loading module "linelog" from file /usr/local/etc/raddb/mods-enabled/linelog linelog { filename = "/var/log/linelog" escape_filenames = no syslog_severity = "info" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{reply:Packet-Type}:-default}" } # Loading module "log_accounting" from file /usr/local/etc/raddb/mods-enabled/linelog linelog log_accounting { filename = "/var/log/linelog-accounting" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loaded module rlm_detail # Loading module "detail" from file /usr/local/etc/raddb/mods-enabled/detail detail { filename = "/var/log/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_radutmp # Loading module "radutmp" from file /usr/local/etc/raddb/mods-enabled/radutmp radutmp { filename = "/var/log/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module rlm_unpack # Loading module "unpack" from file /usr/local/etc/raddb/mods-enabled/unpack # Loaded module rlm_exec # Loading module "ntlm_auth" from file /usr/local/etc/raddb/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Loaded module rlm_totp # Loading module "totp" from file /usr/local/etc/raddb/mods-enabled/totp.pkgsave # Loaded module rlm_dynamic_clients # Loading module "dynamic_clients" from file /usr/local/etc/raddb/mods-enabled/dynamic_clients # Loading module "echo" from file /usr/local/etc/raddb/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loading module "exec" from file /usr/local/etc/raddb/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_unix # Loading module "unix" from file /usr/local/etc/raddb/mods-enabled/unix unix { radwtmp = "/var/log/radwtmp" }Creating attribute Unix-Group # Loaded module rlm_preprocess # Loading module "preprocess" from file /usr/local/etc/raddb/mods-enabled/preprocess preprocess { huntgroups = "/usr/local/etc/raddb/mods-config/preprocess/huntgroups" hints = "/usr/local/etc/raddb/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } # Loading module "sradutmp" from file /usr/local/etc/raddb/mods-enabled/sradutmp radutmp sradutmp { filename = "/var/log/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loaded module rlm_soh # Loading module "soh" from file /usr/local/etc/raddb/mods-enabled/soh soh { dhcp = yes } # Loaded module rlm_expiration # Loading module "expiration" from file /usr/local/etc/raddb/mods-enabled/expiration # Loaded module rlm_logintime # Loading module "logintime" from file /usr/local/etc/raddb/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loaded module rlm_passwd # Loading module "etc_passwd" from file /usr/local/etc/raddb/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } # Loaded module rlm_files # Loading module "files" from file /usr/local/etc/raddb/mods-enabled/files files { filename = "/usr/local/etc/raddb/mods-config/files/authorize" acctusersfile = "/usr/local/etc/raddb/mods-config/files/accounting" preproxy_usersfile = "/usr/local/etc/raddb/mods-config/files/pre-proxy" } # Loaded module rlm_replicate # Loading module "replicate" from file /usr/local/etc/raddb/mods-enabled/replicate # Loading module "auth_log" from file /usr/local/etc/raddb/mods-enabled/detail.log detail auth_log { filename = "/var/log/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "reply_log" from file /usr/local/etc/raddb/mods-enabled/detail.log detail reply_log { filename = "/var/log/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "pre_proxy_log" from file /usr/local/etc/raddb/mods-enabled/detail.log detail pre_proxy_log { filename = "/var/log/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "post_proxy_log" from file /usr/local/etc/raddb/mods-enabled/detail.log detail post_proxy_log { filename = "/var/log/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_chap # Loading module "chap" from file /usr/local/etc/raddb/mods-enabled/chap # Loaded module rlm_date # Loading module "date" from file /usr/local/etc/raddb/mods-enabled/date date { format = "%b %e %Y %H:%M:%S %Z" utc = no } # Loading module "wispr2date" from file /usr/local/etc/raddb/mods-enabled/date date wispr2date { format = "%Y-%m-%dT%H:%M:%S" utc = no } # Loaded module rlm_counter # Loading module "daily" from file /usr/local/etc/raddb/mods-enabled/counter counter daily { filename = "/usr/local/etc/raddb/db.daily" key = "User-Name" reset = "daily" count_attribute = "Acct-Session-Time" counter_name = "Daily-Session-Time" check_name = "Max-Daily-Session" reply_name = "Session-Timeout" allowed_service_type = "Framed-User" cache_size = 5000 } # Loaded module rlm_realm # Loading module "IPASS" from file /usr/local/etc/raddb/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Loading module "suffix" from file /usr/local/etc/raddb/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Loading module "bangpath" from file /usr/local/etc/raddb/mods-enabled/realm realm bangpath { format = "prefix" delimiter = "!" ignore_default = no ignore_null = no } # Loading module "realmpercent" from file /usr/local/etc/raddb/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Loading module "ntdomain" from file /usr/local/etc/raddb/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\\" ignore_default = no ignore_null = no } # Loaded module rlm_always # Loading module "reject" from file /usr/local/etc/raddb/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Loading module "fail" from file /usr/local/etc/raddb/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Loading module "ok" from file /usr/local/etc/raddb/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Loading module "handled" from file /usr/local/etc/raddb/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Loading module "invalid" from file /usr/local/etc/raddb/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Loading module "userlock" from file /usr/local/etc/raddb/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Loading module "notfound" from file /usr/local/etc/raddb/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Loading module "noop" from file /usr/local/etc/raddb/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Loading module "updated" from file /usr/local/etc/raddb/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module rlm_expr # Loading module "expr" from file /usr/local/etc/raddb/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ" } instantiate { } # Instantiating module "eap" from file /usr/local/etc/raddb/mods-enabled/eap # Linked to sub-module rlm_eap_md5 # Linked to sub-module rlm_eap_gtc gtc { challenge = "Password: " auth_type = "PAP" } # Linked to sub-module rlm_eap_tls tls { tls = "tls-common" } tls-config tls-common { verify_depth = 0 ca_path = "/usr/local/etc/raddb/certs" pem_file_type = yes private_key_file = "/usr/local/etc/raddb/certs/cert_opn.pem" certificate_file = "/usr/local/etc/raddb/certs/cert_opn.pem" ca_file = "/usr/local/etc/raddb/certs/ca_opn.pem" private_key_password = <<< secret >>> dh_file = "/usr/local/etc/raddb/certs/dh" fragment_size = 1024 include_length = yes auto_chain = yes check_crl = no check_all_crl = no ca_path_reload_interval = 0 cipher_list = "DEFAULT" cipher_server_preference = no ecdh_curve = "prime256v1" tls_max_version = "1.2" tls_min_version = "1.0" cache { enable = yes lifetime = 24 max_entries = 255 } verify { skip_if_ocsp_ok = no } ocsp { enable = no override_cert_url = yes url = "http://####IP-Address####/ocsp/" use_nonce = yes timeout = 0 softfail = no } }tls: In order to use TLS 1.0 and/or TLS 1.1, you likely need to set: cipher_list = "DEFAULT@SECLEVEL=1" # Linked to sub-module rlm_eap_ttls ttls { tls = "tls-common" default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes require_client_cert = no }tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_peap peap { tls = "tls-common" default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no require_client_cert = no }tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } # Instantiating module "pap" from file /usr/local/etc/raddb/mods-enabled/pap # Instantiating module "cache_eap" from file /usr/local/etc/raddb/mods-enabled/cache_eaprlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked # Instantiating module "attr_filter.post-proxy" from file /usr/local/etc/raddb/mods-enabled/attr_filterreading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /usr/local/etc/raddb/mods-enabled/attr_filterreading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /usr/local/etc/raddb/mods-enabled/attr_filterreading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/access_reject # Instantiating module "attr_filter.access_challenge" from file /usr/local/etc/raddb/mods-enabled/attr_filterreading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /usr/local/etc/raddb/mods-enabled/attr_filterreading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/accounting_response # Instantiating module "attr_filter.coa" from file /usr/local/etc/raddb/mods-enabled/attr_filterreading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/coa # Instantiating module "mschap" from file /usr/local/etc/raddb/mods-enabled/mschaprlm_mschap (mschap): using internal authentication # Instantiating module "linelog" from file /usr/local/etc/raddb/mods-enabled/linelog # Instantiating module "log_accounting" from file /usr/local/etc/raddb/mods-enabled/linelog # Instantiating module "detail" from file /usr/local/etc/raddb/mods-enabled/detail # Instantiating module "preprocess" from file /usr/local/etc/raddb/mods-enabled/preprocessreading pairlist file /usr/local/etc/raddb/mods-config/preprocess/huntgroupsreading pairlist file /usr/local/etc/raddb/mods-config/preprocess/hints # Instantiating module "expiration" from file /usr/local/etc/raddb/mods-enabled/expiration # Instantiating module "logintime" from file /usr/local/etc/raddb/mods-enabled/logintime # Instantiating module "etc_passwd" from file /usr/local/etc/raddb/mods-enabled/passwdrlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no # Instantiating module "files" from file /usr/local/etc/raddb/mods-enabled/filesreading pairlist file /usr/local/etc/raddb/mods-config/files/authorizereading pairlist file /usr/local/etc/raddb/mods-config/files/accountingreading pairlist file /usr/local/etc/raddb/mods-config/files/pre-proxy # Instantiating module "auth_log" from file /usr/local/etc/raddb/mods-enabled/detail.logrlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /usr/local/etc/raddb/mods-enabled/detail.log # Instantiating module "pre_proxy_log" from file /usr/local/etc/raddb/mods-enabled/detail.log # Instantiating module "post_proxy_log" from file /usr/local/etc/raddb/mods-enabled/detail.log # Instantiating module "daily" from file /usr/local/etc/raddb/mods-enabled/counterrlm_counter: Current Time: 1633104335 [2021-10-01 18:05:35], Next reset 1633125600 [2021-10-02 00:00:00]rlm_counter: add_defaults: Startrlm_counter: DEFAULT1 set to 1633125600rlm_counter: DEFAULT2 set to 1633104335rlm_counter: add_defaults: End # Instantiating module "IPASS" from file /usr/local/etc/raddb/mods-enabled/realm # Instantiating module "suffix" from file /usr/local/etc/raddb/mods-enabled/realm # Instantiating module "bangpath" from file /usr/local/etc/raddb/mods-enabled/realm # Instantiating module "realmpercent" from file /usr/local/etc/raddb/mods-enabled/realm # Instantiating module "ntdomain" from file /usr/local/etc/raddb/mods-enabled/realm # Instantiating module "reject" from file /usr/local/etc/raddb/mods-enabled/always # Instantiating module "fail" from file /usr/local/etc/raddb/mods-enabled/always # Instantiating module "ok" from file /usr/local/etc/raddb/mods-enabled/always # Instantiating module "handled" from file /usr/local/etc/raddb/mods-enabled/always # Instantiating module "invalid" from file /usr/local/etc/raddb/mods-enabled/always # Instantiating module "userlock" from file /usr/local/etc/raddb/mods-enabled/always # Instantiating module "notfound" from file /usr/local/etc/raddb/mods-enabled/always # Instantiating module "noop" from file /usr/local/etc/raddb/mods-enabled/always # Instantiating module "updated" from file /usr/local/etc/raddb/mods-enabled/always } # modulesradiusd: #### Loading Virtual Servers ####server { # from file /usr/local/etc/raddb/radiusd.conf} # serverserver inner-tunnel { # from file /usr/local/etc/raddb/sites-enabled/inner-tunnel # Loading authenticate {...}Compiling Auth-Type PAP for attr Auth-TypeCompiling Auth-Type CHAP for attr Auth-TypeCompiling Auth-Type MS-CHAP for attr Auth-Type # Loading authorize {...}Ignoring "sql" (see raddb/mods-available/README.rst)Ignoring "ldap" (see raddb/mods-available/README.rst) # Loading session {...} # Loading post-proxy {...} # Loading post-auth {...} # Skipping contents of 'if' as it is always 'false' -- /usr/local/etc/raddb/sites-enabled/inner-tunnel:330Compiling Post-Auth-Type REJECT for attr Post-Auth-Type} # server inner-tunnelserver default { # from file /usr/local/etc/raddb/sites-enabled/default # Loading authenticate {...}Compiling Auth-Type PAP for attr Auth-TypeCompiling Auth-Type CHAP for attr Auth-TypeCompiling Auth-Type MS-CHAP for attr Auth-Type # Loading authorize {...} # Loading preacct {...} # Loading accounting {...} # Loading post-proxy {...} # Loading post-auth {...}Compiling Post-Auth-Type REJECT for attr Post-Auth-TypeCompiling Post-Auth-Type Challenge for attr Post-Auth-Type} # server defaultserver check-eap-tls { # from file /usr/local/etc/raddb/sites-enabled/check-eap-tls # Loading authorize {...}} # server check-eap-tlsradiusd: #### Opening IP addresses and Ports ####listen { type = "auth" ipaddr = ####IP-Address#### port = 18120}listen { type = "auth" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 }}listen { type = "acct" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 }}listen { type = "auth" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 }}listen { type = "acct" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 }}Listening on auth address ####IP-Address#### port 18120 bound to server inner-tunnelListening on auth address * port 1812 bound to server defaultListening on acct address * port 1813 bound to server defaultListening on auth address :: port 1812 bound to server defaultListening on acct address :: port 1813 bound to server defaultListening on proxy address * port 59509Listening on proxy address :: port 54627Ready to process requests(0) Received Access-Request Id 51 from ####IP-Address####:60698 to ####IP-Address####:1812 length 213(0) User-Name = "####USERNAME####"(0) NAS-Identifier = "####SSID####"(0) Called-Station-Id = "####MAC-ADDRESS####:####SSID####"(0) NAS-Port-Type = Wireless-802.11(0) Service-Type = Framed-User(0) Calling-Station-Id = "####MAC-ADDRESS####"(0) Connect-Info = "CONNECT 0Mbps 802.11b"(0) Acct-Session-Id = "397B490BA728083F"(0) Acct-Multi-Session-Id = "D34F457391B9BB9B"(0) WLAN-Pairwise-Cipher = 1027076(0) WLAN-Group-Cipher = 1027076(0) WLAN-AKM-Suite = 1027077(0) WLAN-Group-Mgmt-Cipher = 1027078(0) Framed-MTU = 1400(0) EAP-Message = 0x02730007016a6d(0) Message-Authenticator = ####Message-Authenticator####(0) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default(0) authorize {(0) policy filter_username {(0) if (&User-Name) {(0) if (&User-Name) -> TRUE(0) if (&User-Name) {(0) if (&User-Name =~ / /) {(0) if (&User-Name =~ / /) -> FALSE(0) if (&User-Name =~ /@[^@]*@/ ) {(0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE(0) if (&User-Name =~ /\.\./ ) {(0) if (&User-Name =~ /\.\./ ) -> FALSE(0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {(0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE(0) if (&User-Name =~ /\.$/) {(0) if (&User-Name =~ /\.$/) -> FALSE(0) if (&User-Name =~ /@\./) {(0) if (&User-Name =~ /@\./) -> FALSE(0) } # if (&User-Name) = notfound(0) } # policy filter_username = notfound(0) [preprocess] = ok(0) [chap] = noop(0) [mschap] = noop(0) [digest] = noop(0) suffix: Checking for suffix after "@"(0) suffix: No '@' in User-Name = "####USERNAME####", looking up realm NULL(0) suffix: No such realm "NULL"(0) [suffix] = noop(0) eap: Peer sent EAP Response (code 2) ID 115 length 7(0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize(0) [eap] = ok(0) } # authorize = ok(0) Found Auth-Type = eap(0) # Executing group from file /usr/local/etc/raddb/sites-enabled/default(0) authenticate {(0) eap: Peer sent packet with method EAP Identity (1)(0) eap: Calling submodule eap_mschapv2 to process data(0) eap_mschapv2: Issuing Challenge(0) eap: Sending EAP Request (code 1) ID 116 length 43(0) eap: EAP session adding &reply:State = 0xa52dae39a559b480(0) [eap] = handled(0) } # authenticate = handled(0) Using Post-Auth-Type Challenge(0) # Executing group from file /usr/local/etc/raddb/sites-enabled/default(0) Challenge { ... } # empty sub-section is ignored(0) Sent Access-Challenge Id 51 from ####IP-Address####:1812 to ####IP-Address####:60698 length 0(0) EAP-Message = 0x0174002b1a01740026104341c6857ac084c511900ba8980aeede667265657261646975732d332e302e3233(0) Message-Authenticator = ####Message-Authenticator####(0) State = 0xa52dae39a559b4805cfddc5abd8542c5(0) Finished requestWaking up in 4.9 seconds.(1) Received Access-Request Id 52 from ####IP-Address####:60698 to ####IP-Address####:1812 length 231(1) User-Name = "####USERNAME####"(1) NAS-Identifier = "####SSID####"(1) Called-Station-Id = "####MAC-ADDRESS####:####SSID####"(1) NAS-Port-Type = Wireless-802.11(1) Service-Type = Framed-User(1) Calling-Station-Id = "####MAC-ADDRESS####"(1) Connect-Info = "CONNECT 0Mbps 802.11b"(1) Acct-Session-Id = "397B490BA728083F"(1) Acct-Multi-Session-Id = "D34F457391B9BB9B"(1) WLAN-Pairwise-Cipher = 1027076(1) WLAN-Group-Cipher = 1027076(1) WLAN-AKM-Suite = 1027077(1) WLAN-Group-Mgmt-Cipher = 1027078(1) Framed-MTU = 1400(1) EAP-Message = 0x02740007031915(1) State = 0xa52dae39a559b4805cfddc5abd8542c5(1) Message-Authenticator = ####Message-Authenticator####(1) session-state: No cached attributes(1) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default(1) authorize {(1) policy filter_username {(1) if (&User-Name) {(1) if (&User-Name) -> TRUE(1) if (&User-Name) {(1) if (&User-Name =~ / /) {(1) if (&User-Name =~ / /) -> FALSE(1) if (&User-Name =~ /@[^@]*@/ ) {(1) if (&User-Name =~ /@[^@]*@/ ) -> FALSE(1) if (&User-Name =~ /\.\./ ) {(1) if (&User-Name =~ /\.\./ ) -> FALSE(1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {(1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE(1) if (&User-Name =~ /\.$/) {(1) if (&User-Name =~ /\.$/) -> FALSE(1) if (&User-Name =~ /@\./) {(1) if (&User-Name =~ /@\./) -> FALSE(1) } # if (&User-Name) = notfound(1) } # policy filter_username = notfound(1) [preprocess] = ok(1) [chap] = noop(1) [mschap] = noop(1) [digest] = noop(1) suffix: Checking for suffix after "@"(1) suffix: No '@' in User-Name = "####USERNAME####", looking up realm NULL(1) suffix: No such realm "NULL"(1) [suffix] = noop(1) eap: Peer sent EAP Response (code 2) ID 116 length 7(1) eap: No EAP Start, assuming it's an on-going EAP conversation(1) [eap] = updated(1) files: users: Matched entry ####USERNAME#### at line 2(1) [files] = ok(1) [expiration] = noop(1) [logintime] = noop(1) pap: WARNING: Auth-Type already set. Not setting to PAP(1) [pap] = noop(1) } # authorize = updated(1) Found Auth-Type = eap(1) # Executing group from file /usr/local/etc/raddb/sites-enabled/default(1) authenticate {(1) eap: Expiring EAP session with state 0xa52dae39a559b480(1) eap: Finished EAP session with state 0xa52dae39a559b480(1) eap: Previous EAP request found for state 0xa52dae39a559b480, released from the list(1) eap: Peer sent packet with method EAP NAK (3)(1) eap: Found mutually acceptable type PEAP (25)(1) eap: Calling submodule eap_peap to process data(1) eap_peap: (TLS) Initiating new session(1) eap: Sending EAP Request (code 1) ID 117 length 6(1) eap: EAP session adding &reply:State = 0xa52dae39a458b780(1) [eap] = handled(1) } # authenticate = handled(1) Using Post-Auth-Type Challenge(1) # Executing group from file /usr/local/etc/raddb/sites-enabled/default(1) Challenge { ... } # empty sub-section is ignored(1) session-state: Saving cached attributes(1) Framed-MTU = 994(1) Sent Access-Challenge Id 52 from ####IP-Address####:1812 to ####IP-Address####:60698 length 0(1) Framed-Protocol = PPP(1) EAP-Message = 0x017500061920(1) Message-Authenticator = ####Message-Authenticator####(1) State = 0xa52dae39a458b7805cfddc5abd8542c5(1) Finished requestWaking up in 4.9 seconds.(2) Received Access-Request Id 53 from ####IP-Address####:60698 to ####IP-Address####:1812 length 396(2) User-Name = "####USERNAME####"(2) NAS-Identifier = "####SSID####"(2) Called-Station-Id = "####MAC-ADDRESS####:####SSID####"(2) NAS-Port-Type = Wireless-802.11(2) Service-Type = Framed-User(2) Calling-Station-Id = "####MAC-ADDRESS####"(2) Connect-Info = "CONNECT 0Mbps 802.11b"(2) Acct-Session-Id = "397B490BA728083F"(2) Acct-Multi-Session-Id = "D34F457391B9BB9B"(2) WLAN-Pairwise-Cipher = 1027076(2) WLAN-Group-Cipher = 1027076(2) WLAN-AKM-Suite = 1027077(2) WLAN-Group-Mgmt-Cipher = 1027078(2) Framed-MTU = 1400(2) EAP-Message = 0x027500ac1980000000a2160303009d010000990303615731da2e96b84114b4906f6757362c4de387209786dc805a8aa307d1521a6a00002ac02cc02bc030c02f009f009ec024c023c028c027c00ac009c014c013009d009c003d003c0035002f000a01000046000500050100000000000a00080006001d00170018000b00020100000d001a00180804080508060401050102010403050302030202060106030023000000170000ff01000100(2) State = 0xa52dae39a458b7805cfddc5abd8542c5(2) Message-Authenticator = ####Message-Authenticator####(2) Restoring &session-state(2) &session-state:Framed-MTU = 994(2) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default(2) authorize {(2) policy filter_username {(2) if (&User-Name) {(2) if (&User-Name) -> TRUE(2) if (&User-Name) {(2) if (&User-Name =~ / /) {(2) if (&User-Name =~ / /) -> FALSE(2) if (&User-Name =~ /@[^@]*@/ ) {(2) if (&User-Name =~ /@[^@]*@/ ) -> FALSE(2) if (&User-Name =~ /\.\./ ) {(2) if (&User-Name =~ /\.\./ ) -> FALSE(2) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {(2) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE(2) if (&User-Name =~ /\.$/) {(2) if (&User-Name =~ /\.$/) -> FALSE(2) if (&User-Name =~ /@\./) {(2) if (&User-Name =~ /@\./) -> FALSE(2) } # if (&User-Name) = notfound(2) } # policy filter_username = notfound(2) [preprocess] = ok(2) [chap] = noop(2) [mschap] = noop(2) [digest] = noop(2) suffix: Checking for suffix after "@"(2) suffix: No '@' in User-Name = "####USERNAME####", looking up realm NULL(2) suffix: No such realm "NULL"(2) [suffix] = noop(2) eap: Peer sent EAP Response (code 2) ID 117 length 172(2) eap: Continuing tunnel setup(2) [eap] = ok(2) } # authorize = ok(2) Found Auth-Type = eap(2) # Executing group from file /usr/local/etc/raddb/sites-enabled/default(2) authenticate {(2) eap: Expiring EAP session with state 0xa52dae39a458b780(2) eap: Finished EAP session with state 0xa52dae39a458b780(2) eap: Previous EAP request found for state 0xa52dae39a458b780, released from the list(2) eap: Peer sent packet with method EAP PEAP (25)(2) eap: Calling submodule eap_peap to process data(2) eap_peap: (TLS) EAP Peer says that the final record size will be 162 bytes(2) eap_peap: (TLS) EAP Got all data (162 bytes)(2) eap_peap: (TLS) Handshake state - before SSL initialization(2) eap_peap: (TLS) Handshake state - Server before SSL initialization(2) eap_peap: (TLS) Handshake state - Server before SSL initialization(2) eap_peap: (TLS) recv TLS 1.3 Handshake, ClientHello (2) eap_peap: (TLS) send TLS 1.2 Alert, fatal handshake_failure (2) eap_peap: ERROR: (TLS) Alert write:fatal:handshake failure(2) eap_peap: ERROR: (TLS) Server : Error in error(2) eap_peap: ERROR: (TLS) Failed reading from OpenSSL: error:1417A0C1:SSL routines:tls_post_process_client_hello:no shared cipher(2) eap_peap: ERROR: (TLS) System call (I/O) error (-1)(2) eap_peap: ERROR: (TLS) EAP Receive handshake failed during operation(2) eap_peap: ERROR: [eaptls process] = fail(2) eap: ERROR: Failed continuing EAP PEAP (25) session. EAP sub-module failed(2) eap: Sending EAP Failure (code 4) ID 117 length 4(2) eap: Failed in EAP select(2) [eap] = invalid(2) } # authenticate = invalid(2) Failed to authenticate the user(2) Using Post-Auth-Type Reject(2) # Executing group from file /usr/local/etc/raddb/sites-enabled/default(2) Post-Auth-Type REJECT {(2) attr_filter.access_reject: EXPAND %{User-Name}(2) attr_filter.access_reject: --> ####USERNAME####(2) attr_filter.access_reject: Matched entry DEFAULT at line 11(2) [attr_filter.access_reject] = updated(2) [eap] = noop(2) policy remove_reply_message_if_eap {(2) if (&reply:EAP-Message && &reply:Reply-Message) {(2) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE(2) else {(2) [noop] = noop(2) } # else = noop(2) } # policy remove_reply_message_if_eap = noop(2) } # Post-Auth-Type REJECT = updated(2) Login incorrect (eap_peap: (TLS) Alert write:fatal:handshake failure): [####USERNAME####/<via Auth-Type = eap>] (from client WLAN port 0 cli ####MAC-ADDRESS####)(2) Delaying response for 1.000000 secondsWaking up in 0.3 seconds.Waking up in 0.6 seconds.(2) Sending delayed response(2) Sent Access-Reject Id 53 from ####IP-Address####:1812 to ####IP-Address####:60698 length 44(2) EAP-Message = 0x04750004(2) Message-Authenticator = ####Message-Authenticator####Waking up in 3.9 seconds.(0) Cleaning up request packet ID 51 with timestamp +11(1) Cleaning up request packet ID 52 with timestamp +11(2) Cleaning up request packet ID 53 with timestamp +11Ready to process requests
tls-config tls-common { ... <snip> ... cipher_list = "DEFAULT" cipher_server_preference = no ecdh_curve = "prime256v1" tls_max_version = "1.2" tls_min_version = "1.0" ... <snip> ... }tls: In order to use TLS 1.0 and/or TLS 1.1, you likely need to set: cipher_list = "DEFAULT@SECLEVEL=1"
