Home
Help
Search
Login
Register
OPNsense Forum
»
English Forums
»
General Discussion
»
IPv6 Setup wont work with Proxmox also Unbound 100% after setting up IPv6 on WAN
« previous
next »
Print
Pages: [
1
]
Author
Topic: IPv6 Setup wont work with Proxmox also Unbound 100% after setting up IPv6 on WAN (Read 936 times)
knax
Newbie
Posts: 1
Karma: 0
IPv6 Setup wont work with Proxmox also Unbound 100% after setting up IPv6 on WAN
«
on:
September 16, 2023, 02:10:16 pm »
Hey guys, ive been trieng to setup IPV6 on my Proxmox Node and also put it into my OPNSense so i can give my VMS in the Lan Network IPV6 connectivity. Ive been trieng around but i cant get it to work my OPNSense VM cant seem to ping the Gateway i have tried around alot and cant get it working here are my settings maybe somebody of you guys has a ide: (X are there to hide my ipv6 ^^)
IPV6 Subnet of my ISP
2a05:XXXX:1:17::/64 GW 2a05:XXXX:1:17::1/64
proxmox settingsvmbr0
vmbr0 nutzt eno3
2a05:XXXX:1:17::50/64
GW: 2a05:XXXX:1:17::1
opnsense vm:
wan (vtnet0) (its the vmbr0 in proxmox)
interface settings:
static ipv6: 2a05:XXXX:1:17::100/64
GW: 2a05:XXXX:1:17::1
opnsense also has the 2a05:XXXX:1:17::1 as a default gateway "netstat -rn -f inet6"
Proxmox Config: /etc/network/interfaces:
auto lo
iface lo inet loopback
iface eno1 inet manual
iface eno2 inet manual
auto eno3
iface eno3 inet manual
post-up echo 1 > /proc/sys/net/ipv4/ip_forward
post-up echo 1 > /proc/sys/net/ipv4/conf/eno3/proxy_arp
iface eno4 inet manual
auto vmbr0
iface vmbr0 inet static
address 109.230.XXXX.38/28
gateway 109.230.XXXX.33
bridge-ports eno3
bridge-stp off
bridge-fd 0
iface vmbr0 inet6 static
address 2a05:XXXX:1:17::50/64
gateway 2a05:XXXX:1:17::1
auto vmbr1
iface vmbr1 inet static
address 10.10.0.0/24
bridge-ports eno2
bridge-stp off
bridge-fd 0
#SwitchNetwork 10.10.0.x/24
auto vmbr2
iface vmbr2 inet static
address 192.168.178.200/24
bridge-ports eno1
bridge-stp off
bridge-fd 0
Also when setting up the WAN Interface my Unbound Service starts taking up 100% CPU for some reason.
Why could that be?
Logged
Print
Pages: [
1
]
« previous
next »
OPNsense Forum
»
English Forums
»
General Discussion
»
IPv6 Setup wont work with Proxmox also Unbound 100% after setting up IPv6 on WAN