Archive > 15.7 Legacy Series

IPsec Status Overview Empty

(1/1)

Yordan Yordanov:
I have 9 configured and running IPsec tunnels on 15.7.24. However nothing is shown on the page VPN - IPsec - Status Overview - the page is empty, only the columns show. I didn't have this problem on 15.1. I have had this problem since the new interface was introduced. Tested with Internet Explorer, Firefox and Chrome - no difference.

AdSchellevis:
Hi Yordan,

There's one other issue reported with some more debug information at GitHub (https://github.com/opnsense/core/issues/634).

We haven't been able to reproduce this yet.

Can you check if your issue is the same?

Regards,

Ad

franco:
We could try to provide a patched version like pfSense has. I will try to provide one till the weekend after the 16.1 excitement settles. :)

Yordan Yordanov:
Yes, it seems it is the same issue. Hope you'll be able to provide a patch soon, there were some useful buttons like Connect/Disconnect on this screen which were handy in some situations. :)

franco:
The patch in question is here, but it seems that it may still hang according to a comment from another user one week ago. There is no official upstream fix yet.

https://wiki.strongswan.org/issues/1185

Navigation

[0] Message Index