English Forums > General Discussion

[Solved]No internet on LAN

(1/2) > >>

Arma@gg3dd0n:
Hello,
i've installed opnsense on a virtual machine so i have configured a WAN with following ip 192.168.2.52 (static or dhcp is same, fritzbox 7490 is dhcp server);
then i put LAN in 192.168.1.1; i can ping from wan and lan with tool inside opnsense but there is no internet from pc and so there is no way to exit from LAN; Ethernet Icon in taskbar (windows) says no internet.
I have tried several options that i found around in the forum with no luck and when i save whatever parameters in gui, it takes too long to reload page.

Please, can you help me?

banym:
Check your DNS Settings. If that does not help, post your configuration, rules and everything that can help us to understand your environment.

bartjsmit:
Check that you have correctly entered a static route for your LAN on the Fritzbox: https://en.avm.de/service/fritzbox/fritzbox-7490/knowledge-base/publication/show/581_Configuring-a-static-IP-route-in-the-FRITZ-Box/

Bart...

Arma@gg3dd0n:

--- Quote from: banym on March 25, 2020, 08:26:33 am ---Check your DNS Settings. If that does not help, post your configuration, rules and everything that can help us to understand your environment.

--- End quote ---
Thank you for reply :)
I don't know what i have to modify; in the configuration wizard i have setted google dns, but it already  was setted in the fritzbox.
So i have included some  screenshot of my configuration with the link at bottom


--- Quote from: bartjsmit on March 25, 2020, 08:37:35 am ---Check that you have correctly entered a static route for your LAN on the Fritzbox: https://en.avm.de/service/fritzbox/fritzbox-7490/knowledge-base/publication/show/581_Configuring-a-static-IP-route-in-the-FRITZ-Box/

Bart...

--- End quote ---
Thank you for reply :)

I have created a a route in the fritzbox, you can see it in screeshot but when i try to create one in opn as you can see, gui becomes unavailable and i need to reset by connecting with the console.


Thank you for support

https://imgur.com/a/OCVF6sV

johnsmi:
1.
The route ffritzbox->opnsense-LAN is only needed if you want to access the opnsense-LAN from fritzbox-Net.

2.
The route is wrong, gateway should be 192.168.2.52 (OPNsense-WAN-IP)

3.
Don't add any routes in OPNsense, those are added automatially.

4.
Can you ping 192.168.2.1 from LAN-Interface in OPNsense?

5.
Are there any restrictions on the fritzbox? child-protection, online-limit, ...

Navigation

[0] Message Index

[#] Next page