Home
Help
Search
Login
Register
OPNsense Forum
»
Archive
»
20.1 Legacy Series
»
Virtualized Opnsense 20.1.3 and interrupt storm message
« previous
next »
Print
Pages: [
1
]
Author
Topic: Virtualized Opnsense 20.1.3 and interrupt storm message (Read 1865 times)
jorgegmayorgas
Newbie
Posts: 5
Karma: 0
Virtualized Opnsense 20.1.3 and interrupt storm message
«
on:
March 20, 2020, 08:15:25 am »
Hello
I recently upgraded my FTTH from 300 to 600 mb.
In order to do that I have to change from previous ISP to O2. O2 has and all in one device (Mitrastar GPT-2541GNAC) to handle phone and internet connection ( I have no IPTV) .
In OPNsense previous ISP connection was using DHCP, with O2 connection is PPPoE as all in one device is on bridge mode . VLAN for VoIP and Internet is still managed by all in one device.
VoIP is working without issues.
Opnsense is virtualized on a i5-2500s with 16gb with Vmware. VM for Opnsense has assigned 2 cores and 4 gb, net driver is vmxnet3.
I have connectivity and it is OK but it seems 600 mb is not possible.
If I try a speedtest from any site available on the internet I can see a message on freebsd screen :
"interrupt storm irq detected on irq266 : throttling interrupt source"
"interrupt storm irq detected on irq257 : throttling interrupt source"
vmstat -i shows those irqs are lan and wan
interrupt total rate
irq1: atkbd0 6 0
irq15: ata1 31467 1
irq17: mpt0 ehci0 85205 2
irq18: uhci0 82599 2
cpu0:timer 3082269 65
cpu1:timer 2862490 61
irq257: vmx0 2525995 54
irq266: vmx1 4007046 85
Total 12677077 269
Shutting down Opnsense and checking with a Dlink router model DIR-842 (PPPoE connection , same as Opnsense) , speedtest results are way better but the logging capabilities of this device are limited or I don't know how to check if device is really throttling or not
My understanding is that my computer hardware used in Opnsense exceeds D-link hardware specs, maybe I am wrong
Full specs
Intel i5-2500s
Gigabyte 1155 Motherboard (GA-H77-DS3H) , latest BIOS
16GB DDR3 1600 Mhz Crucial Ballistix (2x8gb)
Quad Gigabit Intel i340-T4 dedicated to VM (driver version installed is 5.3.5.42, DKMS built)
Intel Corporation 82572EI Gigabit Ethernet Controller (for Openmediavault omly)
3 TB Toshiba 7200 RPM HDD
320 GB Seagate 7200 RPM HDD
SSD 240 GB Kingston (boot drive)
Openmediavault 4.1.35-1
Kernel 4.19.0-0.bpo.6-amd64 #1 SMP Debian 4.19.67-2+deb10u2~bpo9+1 (2019-11-12) x86_64 GNU/Linux
Vmware player version 14.1.7
Does anyone have suggestions or ideas to avoid throttling?
Best regards,
Jorge Giménez
Logged
Print
Pages: [
1
]
« previous
next »
OPNsense Forum
»
Archive
»
20.1 Legacy Series
»
Virtualized Opnsense 20.1.3 and interrupt storm message