English Forums > Documentation and Translation
Wireless client, wpa
(1/1)
nbfedafdf:
Why is there no documentation for wireless ? Do you need to install FreeRADIUS plugin to get wireless cards to function in client mode ? Suppose that you have a supported wireless interface (which I don't at the moment), how to test ?
I found this though
https://docs.netgate.com/pfsense/en/latest/wireless/wireless-interface-configuration-details.html
Wireless client with AES encryption
Config on the wireless page:
Set Mode: Infrastructure Set SSID: SSID of AP Enable WPA: Checked Set The PSK: Shared key from AP in ascii Set WPA mode: WPA Set wpa Key Management Mode: Pre Shared Key Set Authentication: Open System Authentication Set WPA Pairwise: AES
Channel: Use Auto or configure this to match the channel of the AP to which this client will connect.
Mode: Infrastructure (BSS)
SSID: The SSID of the AP to which this client will connect.
The following settings must match those found on the AP, but examples are provided:
Enable WPA: Checked
WPA Pre-Shared Key: The “password” set on the AP
WPA mode: WPA2
WPA Key Management Mode: Pre Shared Key
Authentication: Open System Authentication
And this: https://forum.opnsense.org/index.php?topic=6886.msg30043#msg30043
franco:
The reason for little documentation on wireless is found in the wireless documentation ;)
https://docs.opnsense.org/manual/wireless.html
Cheers,
Franco
Navigation
[0] Message Index
Go to full version