OPNsense
  • Home
  • Help
  • Search
  • Login
  • Register

  • OPNsense Forum »
  • Archive »
  • 19.7 Legacy Series »
  • OpenVPN woes
« previous next »
  • Print
Pages: [1]

Author Topic: OpenVPN woes  (Read 2603 times)

alh

  • Full Member
  • ***
  • Posts: 123
  • Karma: 6
    • View Profile
OpenVPN woes
« on: August 08, 2019, 10:37:01 am »
We upgraded an existing installation to 19.7.2 and since then OpenVPN does not work reliably if at all. As suggested in the migration guide we changed the interface to local and setup port forwards from our WAN interfaces to localhost with mixed results:

- tunnel is established but no traffic passes
- tunnel fails with tls handshake failed check your connection
- tunnel is established and everything works

We tried to switch between local interface and WAN interface itself as suggested in this topic (https://forum.opnsense.org/index.php?topic=5760.msg63101#msg63101) but we had no success. Any help appreciated.
Logged

alh

  • Full Member
  • ***
  • Posts: 123
  • Karma: 6
    • View Profile
Re: OpenVPN woes
« Reply #1 on: August 08, 2019, 10:54:20 am »
OpenVPN connection is possible on one of the WAN connections after some more testing but will fail on the other???
Logged

alh

  • Full Member
  • ***
  • Posts: 123
  • Karma: 6
    • View Profile
Re: OpenVPN woes
« Reply #2 on: August 08, 2019, 03:41:19 pm »
Maybe this is a routing issue? Do I need to define outbound NAT on both interfaces to masquerade the internal IP of the OpenVPN-Server?

E. g. source-nat 127.0.0.0/8 to interface address?

Well it works on the static interface (private ip) with no outbound rule and fails on the dhcp wan interface (masquerade all)... So that probably makes no sense...
Logged

  • Print
Pages: [1]
« previous next »
  • OPNsense Forum »
  • Archive »
  • 19.7 Legacy Series »
  • OpenVPN woes
 

OPNsense is an OSS project © Deciso B.V. 2015 - 2024 All rights reserved
  • SMF 2.0.19 | SMF © 2021, Simple Machines
    Privacy Policy
    | XHTML | RSS | WAP2