OPNsense
  • Home
  • Help
  • Search
  • Login
  • Register

  • OPNsense Forum »
  • Archive »
  • 15.7 Legacy Series »
  • IPv6 question(s) and a problem
« previous next »
  • Print
Pages: [1]

Author Topic: IPv6 question(s) and a problem  (Read 5988 times)

phoenix

  • Hero Member
  • *****
  • Posts: 506
  • Karma: 55
    • View Profile
IPv6 question(s) and a problem
« on: August 25, 2015, 06:41:01 pm »
Hi all

I have my internet server from the French ISP free and I have IPv6 available to me, I have just been testing it with the current 15.7.10 OPNsense (thanks fo the update).

I've tried several of the comments in the forums for setting this up but I only seem to get the IP address on the WAN, the LAN is set to "track" but doesn't seem to get an IPv6 IP address.

First question. In the setting for the "IPv6 Prefix ID" you have the following comment:

Quote
Enter a hexadecimal value between 0 and 0 here, default value is 0.
That doesn't make sense to me, is that statement wrong?

A disable/enable of the WAN interface shows this error in my splunk log server:

Quote
Aug 25 18:24:50 opnsense: /usr/local/etc/rc.filter_configure_sync: Could not find IPv6 gateway for interface(wan).
From a terminal connected t the LAN interface I can ping6 ipv6.google.com and get a response, if I can do that ping does that error matter?

[edit]I've just noticed this entry in my log from an earlier test today:

Quote
Aug 25 16:41:56 radvd[60640]: can't join ipv6-allrouters on vmx1
That was probably when I rebooted OPNsense after the update. :)

This instance of OPNsense is a virtual machine running on ESXi6 and has the vmware tools installed and I'm using vmxnet3 driver for the three NICs in the VM.

The article I followed for the configuration was this one:

https://www.kirkg.us/posts/setting-up-ipv6-with-opnsense-and-comcast/

Does this appear to be a bug or do you need any more info from me?

Regards


Bill
« Last Edit: August 25, 2015, 06:44:58 pm by phoenix »
Logged
Regards


Bill

franco

  • Administrator
  • Hero Member
  • *****
  • Posts: 13679
  • Karma: 1176
    • View Profile
Re: IPv6 question(s) and a problem
« Reply #1 on: August 25, 2015, 07:29:53 pm »
Bill, first things first: are you loading vmxnet manually via loader.conf? are you using the vanilla open-vm-tools-nox11 package or os-vmware?
Logged

phoenix

  • Hero Member
  • *****
  • Posts: 506
  • Karma: 55
    • View Profile
Re: IPv6 question(s) and a problem
« Reply #2 on: August 25, 2015, 07:34:22 pm »
I installed tha packages recently and this is the installed version:

open-vm-tools-nox11-1280544_12

There also seems to be this wrapper installed:

os-vmware-1.1
Logged
Regards


Bill

franco

  • Administrator
  • Hero Member
  • *****
  • Posts: 13679
  • Karma: 1176
    • View Profile
Re: IPv6 question(s) and a problem
« Reply #3 on: August 25, 2015, 07:57:24 pm »
Ok, in the case of vmxnet the kernel module is not loaded before interface configure so the initial WAN connection will fail. Still working this part out.

More on the other things tomorrow.
Logged

phoenix

  • Hero Member
  • *****
  • Posts: 506
  • Karma: 55
    • View Profile
Re: IPv6 question(s) and a problem
« Reply #4 on: August 25, 2015, 08:01:08 pm »
Thanks for the quick update. :) As I said, this is only a testing scenario and it's not really a priority for me so I'll look forward to  your update.
Logged
Regards


Bill

JerTeske

  • Newbie
  • *
  • Posts: 12
  • Karma: 1
    • View Profile
Re: IPv6 question(s) and a problem
« Reply #5 on: August 26, 2015, 04:02:12 am »
I too have problems with getting IPv6 working. I've tried every option I could think of as well. But I'm waiting for 10.2 to be released, which I hope will include the newer set of igb intel drivers. *prays for new snapshot*
Logged
Supermicro A1SAM-2558
8GB DDR3
80GB WD Velociraptor

HP ProCurve 2520-----> Asus RT-AC66U

franco

  • Administrator
  • Hero Member
  • *****
  • Posts: 13679
  • Karma: 1176
    • View Profile
Re: IPv6 question(s) and a problem
« Reply #6 on: August 26, 2015, 04:36:22 pm »
JerTeske:

I'll have a 10.2 test build available that I am going to announce shortly after giving it a little bit more testing.

Bill:

the "0 to 0" may be ok, depending on how the value is set up. It's a bit complicated. Need to compile a list of possible targets.

Do you have a IPv6 gateway configured or is it announced via IPv6 / DHCPv6? The message points to the latter.


Gotta catch a flight, brb. :)
Logged

phoenix

  • Hero Member
  • *****
  • Posts: 506
  • Karma: 55
    • View Profile
Re: IPv6 question(s) and a problem
« Reply #7 on: August 26, 2015, 04:41:59 pm »
Quote from: franco on August 26, 2015, 04:36:22 pm
JerTeske:

I'll have a 10.2 test build available that I am going to announce shortly after giving it a little bit more testing.
I'll also look forward to trying that.

Quote from: franco on August 26, 2015, 04:36:22 pm
Bill:

the "0 to 0" may be ok, depending on how the value is set up. It's a bit complicated. Need to compile a list of possible targets.
It's probably just my lack of experience with IPv6.

Quote from: franco on August 26, 2015, 04:36:22 pm
Do you have a IPv6 gateway configured or is it announced via IPv6 / DHCPv6? The message points to the latter.
I believe it's supplied DHCPv6. I guess I'm going to have to do a bit more studying on this topic.

Quote from: franco on August 26, 2015, 04:36:22 pm
Gotta catch a flight, brb. :)
Enjoy the flight, going somewhere exciting? :)
Logged
Regards


Bill

  • Print
Pages: [1]
« previous next »
  • OPNsense Forum »
  • Archive »
  • 15.7 Legacy Series »
  • IPv6 question(s) and a problem
 

OPNsense is an OSS project © Deciso B.V. 2015 - 2023 All rights reserved
  • SMF 2.0.19 | SMF © 2021, Simple Machines
    Privacy Policy
    | XHTML | RSS | WAP2