Virtual IP won't register.

[Andy259]

Hello,

I'm having issues with multiple Public IP's My current set up is thus.

On initial wizard setup I put in the details supplied by my ISP.

I was then issued with 2 other Public IP's this gives me 3 in total

Public IP 1 >>> Plesk (webserver, single machine, working as should)

Public IP 2 >>> Docker (installed on Proxmox VM, the forwarding is pointing to the VM and NOT the host machine)

Public IP 3 >>> Intended use point to Proxmox machine.

So IP 1 & 2 are working as they should all is well BUT at present if I want to access my Proxmox machine obviously I have to alter the source destination I can then access Proxmox on e.g 194.168.225.37:8006 But obviously then cannot access the Docker containers via the same IP.

When I added the second IP I watched a tutorial and added it as a Virtual IP BUT when I try this with the 3rd IP I get You cannot use the network address.

However if i just do a forward to the 3rd IP it works BUT that surely is not correct that it's not registered as an IP if you know what I mean.

[Patrick M. Hausen]

Please show how you are trying to add the virtual IP address and the error message as screen shots.

[Andy259]

Thank you for your response Patrick.

I have included screenshots of how I currently have things set up, I've had to post each image in a different post as I reach upload size.

[Andy259]

This Is the 1st Public IP I'm using you will see this is also natted to 192.168.1.109 and is working as it should.

[Andy259]

Current Nat settings all seem to be working as they should, I have tested the .40 Public IP by pointing to a Proxmox install and appears to be working(this is the one that won't add as an additional Public IP.)

[Andy259]

My Current Virtual IP settings.