New 1G line, achievable direct from modem, but not through opnsense box?

Started by keanu, August 18, 2020, 10:17:32 PM

Previous topic - Next topic

Quote from: mimugmail on August 22, 2020, 10:59:28 AM
Sometimes the servers from speedtest are slower than 1G

This was tested using both fast.com and speedtest.net. Both come out relatively the same.

800Mb is good in my opinion, for a 1G network

but indeed, with some tuning you could achieve more

the upload/download ratio is huge BTW

also, I would try using http://www.dslreports.com/speedtest so you have bufferbloat information too
https://www.signorini.ch
Protectli Pfsense Mi7500L6 Intel 7Th Gen Core I7 7500U 16Gb Ddr4 Ram
512Gb Msata Ssd
6 X Intel Gigabit Ethernet

in System: Settings: Tunables, try

net.inet.tcp.recvspace   Maximum incoming/outgoing TCP datagram size (receive)   1048576   
net.inet.tcp.sendspace   Maximum incoming/outgoing TCP datagram size (send)   1048576   
net.inet.ip.intr_queue_maxlen   Maximum size of the IP input queue   2048   


eventually also try disabling PowerD
https://www.signorini.ch
Protectli Pfsense Mi7500L6 Intel 7Th Gen Core I7 7500U 16Gb Ddr4 Ram
512Gb Msata Ssd
6 X Intel Gigabit Ethernet

Quote from: siga75 on August 22, 2020, 11:50:01 AM
800Mb is good in my opinion, for a 1G network

but indeed, with some tuning you could achieve more

the upload/download ratio is huge BTW

also, I would try using http://www.dslreports.com/speedtest so you have bufferbloat information too

The connection is actually between like 1124-1145 or so. Upload is 50-52 or so.

Yeahh the upload isn't fantastic, but there isn't a lot I can do about it with Virgin sadly. I believe it's something to do with the DOCSIS 3.1 they use? Still, gig connection for £62pcm isn't bad!

Perfect, will run that after I make the changes suggested!

Sadly it's still coming out as the following:

18ms
653 megabit/s
18ms
51.6 megabit/s

PowerD is disabled, and everything below it is on Maximum.

Thanks,

Swapped over to an Intel genuine 4 port nic as I thought that the realtek one I was using for the LAN may have been causing issues, however it hasn't made a difference sadly. If anyone has any ideas, i'd greatly appreciate it. Thanks.