31
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
32
21.1 Legacy Series / Periodic Interface reset seems to ignore my params
« on: March 05, 2021, 07:46:35 pm »
Hi all, I'm well aware of: https://forum.opnsense.org/index.php?topic=5276.0 but lower and upper case both seem to be ignored...
I've tried lower case as posted by franco in the above mentioned thread.
Hope one of you has a hint...
Code: [Select]
$ sudo grep "authorization successful" /var/log/ppps.log|grep ^Mar
Mar 1 03:46:52 router ppp[52767]: [opt1_link0] LCP: authorization successful
Mar 1 03:54:25 router ppp[52767]: [opt1_link0] LCP: authorization successful
Mar 2 18:09:07 router ppp[52767]: [opt1_link0] LCP: authorization successful
Mar 5 02:09:34 router ppp[52767]: [opt1_link0] LCP: authorization successful
I've tried lower case as posted by franco in the above mentioned thread.
Hope one of you has a hint...
33
20.7 Legacy Series / Re: 20.7.3 zabbix-agent 5.0.3 won't start
« on: October 05, 2020, 01:26:34 am »
removing the zabbix config from the xml, uninstalling the plugin and reimporting the config fixed the problem...
34
20.7 Legacy Series / Re: 20.7.3 zabbix-agent 5.0.3 won't start
« on: October 04, 2020, 09:24:00 am »
What version is installed on your side?
Prior to the last upgrade my setup ran just fine too...
Prior to the last upgrade my setup ran just fine too...
35
20.7 Legacy Series / 20.7.3 zabbix-agent 5.0.3 won't start
« on: October 04, 2020, 03:24:50 am »
There seems to be a bug left from the 4->5 upgrade:
root@router:/home/mirco # zabbix_agentd -c /usr/local/etc/zabbix_agentd.conf -f
zabbix_agentd [16577]: Warning: EnableRemoteCommands parameter is deprecated, use AllowKey=system.run
Starting Zabbix Agent [router.xxx.lan]. Zabbix 5.0.3 (revision 6e02cfb1cf).
Press Ctrl+C to exit.
after manually removing the line:
EnableRemoteCommands=0
I still get the following error:
listener failed: bind() for [[10.10.xx.1]:10050] failed: [49] Can't assign requested address
But there's nothing running on that port...
Hope one of U has a hint...
root@router:/home/mirco # zabbix_agentd -c /usr/local/etc/zabbix_agentd.conf -f
zabbix_agentd [16577]: Warning: EnableRemoteCommands parameter is deprecated, use AllowKey=system.run
- or DenyKey=system.run
- instead
Starting Zabbix Agent [router.xxx.lan]. Zabbix 5.0.3 (revision 6e02cfb1cf).
Press Ctrl+C to exit.
after manually removing the line:
EnableRemoteCommands=0
I still get the following error:
listener failed: bind() for [[10.10.xx.1]:10050] failed: [49] Can't assign requested address
But there's nothing running on that port...
Hope one of U has a hint...
36
19.1 Legacy Series / Re: Configuring LDAP server against Samba 4 DC
« on: July 19, 2019, 11:59:55 pm »
I'm on the same page, but don't have a solution yet...
37
19.1 Legacy Series / Re: External User DB from LDAP not authenticating if user exists locally
« on: July 19, 2019, 02:16:18 am »
Hi Franco,
wasn't aware of an ability for a user import...
Just checked in Sys > Admin, didn't find an expected "import button" but found a menu to choose a database. Changed it to my preferred LDAP server, but using the test again gave me the same experience...
Also had a brief google search, found and read this...
As mine are created and not imported, can you please let me know how to import users?
wasn't aware of an ability for a user import...
Just checked in Sys > Admin, didn't find an expected "import button" but found a menu to choose a database. Changed it to my preferred LDAP server, but using the test again gave me the same experience...
Also had a brief google search, found and read this...
As mine are created and not imported, can you please let me know how to import users?
38
19.1 Legacy Series / External User DB from LDAP not authenticating if user exists locally
« on: July 16, 2019, 05:49:19 pm »
Hi all,
I've added an LDAP server and can successfully test the passwd of a locally non existing user. But as soon as the user exists on the OPNsense local User-DB (even if I set a scrambled Passwd) I get the following error:
Hope one of you has hint?
I've added an LDAP server and can successfully test the passwd of a locally non existing user. But as soon as the user exists on the OPNsense local User-DB (even if I set a scrambled Passwd) I get the following error:
Hope one of you has hint?
39
19.1 Legacy Series / Re: Can't Upgrade from GUI nor Console
« on: May 23, 2019, 08:37:52 am »
Yes I had set one static route...
Just deleted it and installed 19.1.8 ;-)
THX a ton wolkerx
Just deleted it and installed 19.1.8 ;-)
THX a ton wolkerx
40
19.1 Legacy Series / [SOLVED] Can't Upgrade from GUI nor Console
« on: May 23, 2019, 01:37:39 am »
I've just tried to check for upgrades and ran into issue's, first failure was:
Then I google'd and found:
https://forum.opnsense.org/index.php?topic=12550.0
But checking on the console my cert.pem sized isn't 0.
Google'd again and found:
https://forum.opnsense.org/index.php?topic=4081.msg14836#msg14836
So I tried as follow's:
what I got was:
Using HTTPS I got this
So at this point I'm lost and hoping for hints...
EDIT:
tried once more after a reboot:
Quote
Could not authenticate the selected mirror.
Then I google'd and found:
https://forum.opnsense.org/index.php?topic=12550.0
But checking on the console my cert.pem sized isn't 0.
Google'd again and found:
https://forum.opnsense.org/index.php?topic=4081.msg14836#msg14836
So I tried as follow's:
Code: [Select]
fetch https://mirror.fra10.de.leaseweb.net/opnsense/FreeBSD%3A11%3Aamd64/19.1/latest/packagesite.txz
file packagesite.txz
what I got was:
Code: [Select]
packagesite.txz: HTML document, UTF-8 Unicode text
Using HTTPS I got this
Code: [Select]
fetch https://mirror.fra10.de.leaseweb.net/opnsense/FreeBSD%3A11%3Aamd64/19.1/latest/packagesite.txz
No server SSL certificate
fetch: https://mirror.fra10.de.leaseweb.net/opnsense/FreeBSD%3A11%3Aamd64/19.1/latest/packagesite.txz: Authentication error
So at this point I'm lost and hoping for hints...
EDIT:
tried once more after a reboot:
Quote
Updating OPNsense repository catalogue...
pkg-static: repository meta /var/db/pkg/OPNsense.meta has wrong version or wrong format
pkg-static: Repository OPNsense load error: meta cannot be loaded No such file or directory
Fetching meta.txz: 100% 5 KiB 4.7kB/s 00:01
pkg-static: No signature found
repository OPNsense has no meta file, using default settings
Fetching packagesite.txz: 100% 5 KiB 4.7kB/s 00:01
pkg-static: No signature found
Unable to update repository OPNsense
Error updating repositories!
41
19.1 Legacy Series / Re: opnSense WLAN question with WLE200NX
« on: May 23, 2019, 01:12:09 am »
I would totally agree with monstermania
Here's a list with the supported chipsets:
https://docs.google.com/spreadsheets/d/11cF4UoNL68Me5ZC6qhjFPmzdW7mib56dBIAKz30Qpug/edit?hl=en&hl=en#gid=0
Here's a list with the supported chipsets:
https://docs.google.com/spreadsheets/d/11cF4UoNL68Me5ZC6qhjFPmzdW7mib56dBIAKz30Qpug/edit?hl=en&hl=en#gid=0
42
19.1 Legacy Series / Re: 3CX Firewall Test fails even though Firewall > NAT > Outbound is set to hybrid..
« on: May 21, 2019, 09:55:48 am »
Reply, answer and solution to my own question:
Reread the Doc's: https://www.3cx.com/docs/pfsense-firewall/
DON'T USE PORT LISTS IN ALIASES!!!!
leads to:
Reread the Doc's: https://www.3cx.com/docs/pfsense-firewall/
DON'T USE PORT LISTS IN ALIASES!!!!
leads to:
43
18.7 Legacy Series / Re: Traffic Shaping with FQ_Codel
« on: May 21, 2019, 03:00:44 am »
Hi there,
I'm currently struggling with setting a 3CX behind a OPNsense. Specifically having issue's with the firewall Test...
So would you please share your Port-Forwarding and Outbound settings, that would really help alot!
Sorry for "HiJacking" this one, here's my solution:
https://forum.opnsense.org/index.php?topic=12793.msg59243#msg59243
Best Mircsicz
I'm currently struggling with setting a 3CX behind a OPNsense. Specifically having issue's with the firewall Test...
So would you please share your Port-Forwarding and Outbound settings, that would really help alot!
Sorry for "HiJacking" this one, here's my solution:
https://forum.opnsense.org/index.php?topic=12793.msg59243#msg59243
Best Mircsicz
44
19.1 Legacy Series / [SOLVED] 3CX Firewall Test fails even though Firewall > NAT > Outbound is Hybrid
« on: May 20, 2019, 06:05:51 pm »
Hi all,
I've read and followed those three thread's: https://forum.opnsense.org/index.php?topic=448.0 and https://forum.opnsense.org/index.php?topic=7299.msg32981#msg32981. Especially the last one has a very specific solution but sadly that does not help with the current version of 3CX
This is what the test tells:
This is what I've setup in OPNsense (BTW: 19.1.7)
This is the Forwardings:
Doesn't make a difference if I disable or enable those rule's...
And yes as this is Multi-WAN there's a rule to tell the 3CX to only use VDSL:
The Document supplied by 3CX neither isn't very supportive, it's just telling in detail why the test is correct: https://www.3cx.com/docs/firewall-checker/
So I'm kinda lost with this, and 3CX totally refuses any further support until firewall test gets "GREEN"
I've read and followed those three thread's: https://forum.opnsense.org/index.php?topic=448.0 and https://forum.opnsense.org/index.php?topic=7299.msg32981#msg32981. Especially the last one has a very specific solution but sadly that does not help with the current version of 3CX
This is what the test tells:
This is what I've setup in OPNsense (BTW: 19.1.7)
This is the Forwardings:
Doesn't make a difference if I disable or enable those rule's...
And yes as this is Multi-WAN there's a rule to tell the 3CX to only use VDSL:
The Document supplied by 3CX neither isn't very supportive, it's just telling in detail why the test is correct: https://www.3cx.com/docs/firewall-checker/
So I'm kinda lost with this, and 3CX totally refuses any further support until firewall test gets "GREEN"
45
19.1 Legacy Series / Re: ipsec routing problem after adding failover WAN
« on: April 05, 2019, 08:29:44 pm »
@ralf.kirmis No, as shown in the above ScreenShot ;-)
Had a call with Jos, installing two patches solved the Issue:
So I'll be skipping 19.1.5 or wait for the Hotfix Franco has in the makes ...
EDIT: seems to be already out:
Had a call with Jos, installing two patches solved the Issue:
Code: [Select]
sudo opnsense-patch 7835e9c 198887ed
So I'll be skipping 19.1.5 or wait for the Hotfix Franco has in the makes ...
EDIT: seems to be already out:
Code: [Select]
[13/38] Fetching opnsense-19.1.5_1.txz: 100% 4 MiB 2.2MB/s 00:02