31
20.1 Legacy Series / Re: Trying to enable UPNP causes reboot
« on: April 01, 2020, 03:28:14 am »root@OPNsense:~ # /usr/local/sbin/miniupnpd -d -f /var/etc/miniupnpd.conf -P /var/run/miniupnpd.pid
Error reading configuration file /var/etc/miniupnpd.conf
Well the only thing left I can think of is that you either have an issue with your miniupnpd.conf file or it doe not exist. Can you check to make sure the file is present?
my /var/etc/miniupnpd.conf
Code: [Select]
ext_ifname=igb0
port=2189
listening_ip=igb1
listening_ip=igb3
listening_ip=igb2
secure_mode=yes
presentation_url=https://10.200.200.1/
uuid=4bfsvd1c-3391-8sfda6-1c1d-3525sdf50ae0b
serial=4BD1042C
model_number=20.1.3
allow 1024-65535 10.200.200.110/32 1024-65535
allow 1024-65535 10.200.200.111/32 1024-65535
allow 1024-65535 10.100.100.100/32 1024-65535
allow 1024-65535 10.0.0.100/32 1024-65535
deny 0-65535 0.0.0.0/0 0-65535
enable_upnp=yes
enable_natpmp=no
clean_ruleset_interval=600
min_lifetime=120
max_lifetime=86400