Messages

Hi.

Can someone help me to achieve this solution in OPNSense?

Facts:
- OPNSense as main router/firewall installed on VMWare server with two network interfaces: one interface connected to WAN, second to switch as trunk (all vlans allowed);
- one WAN connection (let assume 10Mb, syncro);
- many clients connected via different VLANs (for each vlan is created OPT interface, for example I will use OPT1).
- all devices are connected to switch
- client pays for specified speed of his uplink (ie. 1Mb, synchro).

Goal:
- cut the speed of uplink to this payed by client.

Currently I've done this on m0n0wall using pipes:
- 1 pipe for download, and 1 for upload, both without mask - just set the bandwidth,
- rules are applied by interface - one rule for incomming and one for outgoing - and it works good.

I tried the same solution on OPNSense, but without luck - speed is not limited to pipe, but is using full speed of WAN.

What I'm doing wrong and how can I achieve the same behaviour as in m0n0?

Please, find attached screens with my setup in OPNSense.

Thanks in advance!