Messages

Please set Zenarmor in L3 Router Mode with Netmap Emulated driver and protect the Inner (LAN) side interface of Bridge. This will provide you to Monitor your Bridge on Zenarmor.

Hallo,

have the same Problem.

But i cant get my configuration into Bridge Mode L2 Mode.
OPN Sense 24.10
Silicom Bypass-Adapter

egb0_LAN
egb1_WAN
egb2_DMZ
egb3_ADM
em0_onboard

i will traffic between LAN <=> "DMZ" (on DMZ Switch all Traffic from our "VPN OutSites" come in
7 x Router - VPN - Router.
(But the Sites are not trustworthy - because i dont know what is going on there)

So i make a OPNSense Bridge between LAN and "DMZ" 

Zenarmor runs in reporting only Mode so i think all is ok.


But I cant get it to Bridge Mode L2 Mode ??

I think i take LAN and DMZ with the right security Zones

Apply

Error - For Bridge Mode, you need to assign an interface for each lan and
wan security zones.

I test x constellations / combinations

See also Picture

I dont unterstand whats wrong ? https://forum.opnsense.org/Smileys/default/undecided.gif

Please help

Thanks

AKH

I can report that it's an information warning error.

It was not an error related to OPNSense updates. 
It was a situation affecting all customers. An update was made shortly.

You should no longer see the error.

This does not affect Zenarmor operations.
The team is working on the issue, and it will be resolved shortly.

Good to hear @IHK

Would it be possible to include a description of what went wrong and how it was solved?

The trigger was clear: the upgrade to 24.7.8 started the erors from appearing.

Is this only happening to paying customers or also others using the free version?

Can you share the logs and configuration by following the instructions in the link below so that we can make a detailed review?
I ask you to tick all the options.


https://www.zenarmor.com/docs/support/reporting-bug

This does not affect Zenarmor operations.
The team is working on the issue, and it will be resolved shortly.

Does this happen again when you clear Chrome's DNS cache?

chrome://net-internals/#dns

The same thing keeps happening.

Can you share the logs and configuration by following the instructions in the link below so that we can make a detailed review?
I ask you to tick all the options.


https://www.zenarmor.com/docs/support/reporting-bug

If you report the white and blacklists you sent as "Feedback," these anonymously received pieces of information will be confirmed, and if validated, this information will be sent to all "Cloud Threat Intelligence" servers.

If I understood your other issue correctly.

You can do it by taking all the addresses below only into the "example.com" block & white list.

A.example.com 
B.example.com 
test.example.com

You can be sure that we will continue to update you through the ticket you created.

Does this happen again when you clear Chrome's DNS cache?

chrome://net-internals/#dns

You can benefit from the following article to provide control.

https://www.zenarmor.com/docs/guides/disabling-hardware-offloading#disabling-hardware-offloading-on-opnsense

Yes, that's correct.

If you have a free license, you can continue blocking DNS over HTTPS and DNS over TLS within the default policy under Apps Controls / Network Management.

If you have a Home or higher license, you can also manually block "DNS over HTTPS and DNS over TLS" in the Web controls menu.

Can you share the logs and configuration by following the instructions in the link below so that we can make a detailed review?
I ask you to tick all the options.


https://www.zenarmor.com/docs/support/reporting-bug

Hi All,

Zenarmor version 1.18.1 has been released.

We would like to report that Wireguard connection issues have been resolved.

After the 1.18.1 update, we kindly ask you to add Wireguard interfaces again.

Can you share the logs and configuration by following the instructions in the link below so that we can make a detailed review?
I ask you to tick all the options.


https://www.zenarmor.com/docs/support/reporting-bug

Zenarmor has potential, However advanced features and functions that many competitors have already developed, including AI capabilities are their in roadmap. This is why we have continued to support them, as we once saw promise in their roadmap. However, the lack of commitment to customer satisfaction is concerning.

If Zenarmor is positioning itself as a cost-effective solution compared to the market, it's vital for them to understand the challenges customers face and the frustration that arises when commitments are not honored. It's important for us to have a platform to express our experiences and concerns.

I hope Zenarmor will recognize the need for accountability and take customer feedback seriously. Open communication and reliability are essential to maintaining a loyal customer base.

Thank you for allowing me to share my thoughts.

I agree, lately they are more concerned with large scale enterprise customers than with those of us betatesters out there. On the zenarmor website you can request a trial version of zenarmor SSE for home users and I have been trying for weeks and all I get is advertising in my email.

For an SSE trial license, please send an email to sales@zenarmor.com. They will assist you with this as soon as possible.

Thank you for your update.