Messages

Hi Guys,

So I finally had the chance to get a little downtime...23. 1.7_3 still breaks my Firewall.  Unfortunately, the proposed command did not spit out a result. But I stood upon something wierd in my log that was not there before the upgrade to 23.1.7_3. Dowgraded to 23.1.6 since to get back up and running using opnsense-revert -r 23.1.6. Please see screen capture. You will see an error about the wrong gateway beeing chosen or something like that. The gateway for these vlan should be 192.168.12.1 and not 192.168.15.1. Why is it choosing the wrong one?

Thank you  :o

Nic

Hi Struppie,

Could you please add a before and after of your conf.xml for reference? Im not sure I completely follow the changes you had to make to get it working.

Thank you  ;D

Nic

Hi Franco,

No, default gateway switching is not enable since im not using the gateway for multiwan purpuse but for Far gateways. I will try to send you the info running on 23.1.7_3 without the usualy "Someone broke the internet again"..... situation.

Thank you,

Nicolas

Hi Franco,

So as promised here were I stand with version 23.1.7_3. Attached you will find a screen capture of "single gateways" currently running with all updated packages but with a #opnsense-revert -r 23.1.6 in shell to force the firewall to use 23.1.6 instead of 23.1.7_3. VLAN'S 10-20-30-40 and CISCO_WAN_INT are all "FAR GATEWAYS" configured with a routes as shown in screen capture called "Routes". These networks all opperates on my cisco 891f running downstream via 192.168.12.0/24 (Router Wan interface). Has soon as I update to 23.1.7_1-2-3 and try to add a gateway or reboot the firewall it renderes my network to the ground.

Thank you,

Nic :o

Hi Franco,

Just did the upgrade to 23.1.7_2 with the proposed patch on github, and at first glaced it fixed the eractic pinger behaviour. I will get back to you later when i move back my network behing my firewall.

Thank you,

Nic

Hi every one!,

I upgraded to the latest version on Opnsense *23.1.7_1* and iv'e not been able to come back online since. My firewall is between my modem and a Cisco router. It was working fine on 23.1.6 in conjunction with Zenarmor. But now the pingeer  that tests the reachability of my « far gateway's » (10.10.0.0/24 | 10.10.10.0/24 | 10.10.20.0/24 | 192.168.1.0/24 VIA static routes that point to 192.168.12.0 /24 via 192.168.12.1 (Cisco WAN interface),  keeps bouncing around erratically from an online status to no ping at all but with the green online status. And they refuse to actualy reach the router like it was doing before. Has anybody experience this? I'm totaly in the dark here. Tried reinstalling from scrach but it does noting to help. It was all working fine with 21.1.6. In then mean time i reactivated my "Residential Gateway" and IP NAT OUSIDE on my Cisco router to bypass my Firewall temporarely... Im at a loss here.

Hoping for some Help :)

Thank you,

Nic