Messages

Poor opnsense-patch. I think you need to go to /usr/local/etc/opnsense-update.conf and replace "%%CORE_ARCH%%" with "amd64". Sorry.


Cheers,
Franco

Is this manual change still needed or has it been corrected in the upgrade?

Good day,
I just setup a Wireguard server on my OPNsense. Then used the Peer generator to create my client config and copied the config into the Wireguard App on my phone. Everything seems to be working well but I am seeing Errors In on OPNsense Interface Statistics and none on the outbound. What could be the cause of the errors?
Thanks for any help.

Just curious, how many folks out there are using Automatic Firmware Updates? For those who are, have you encountered any problems? For those that aren't, why not? Thanks!

UFS does not use copy on write. If you are worried about uneven drive wear because of logging you either need to switch to ZFS or configure a central logging server

Is the only way to switch to ZFS a complete reinstall?

you're fine - ZFS is a copy on write system https://en.wikipedia.org/wiki/Copy-on-write

I am using UFS, would that be any different?

Good day,

Just wondering how the logging retention affects the hard drive. I am currently keeping logs for seven days and I am not sure if, after the logs are flushed and a new seven day log starts, the same part of the drive is being written to for each seven day retention?

Thanks for any assistance.

Just restarting the Crowdsec plugin worked for me.

Same, except I have been sitting on "Waiting for PIDS: 5 digit number

OpenVPN is no longer passing traffic for me since the upgrade. Just enabled the server for the first time since the upgrade and while I am able to connect, I am unable to view any websites. They all just time out. Tried on my Android phone as well as a Chromebook. Both with the same result. Any ideas/suggestions?
Thanks!

Update: All working perfectly again. For some reason the OpenVPN interface was disabled. As soon as I enabled the interface...BOOM...all good again :).

Remove php81-pecl-mongodb and rerun the opnsense-update -u

php81-pecl-mongodb was removed.

When I run opnsense-update -u I get the message that "No known packages set to fetch was specified".

Update: After doing the above the PHP errors have now stopped! :)

Thanks @newsense for all of your help. Much appreciated! Cheers!

What's the output when you audit health in the firmware section ?

***GOT REQUEST TO AUDIT HEALTH***
Currently running OPNsense 23.7 at Sun Aug  6 13:06:02 ADT 2023
>>> Check installed kernel version
Version 23.7 is correct.
>>> Check for missing or altered kernel files
No problems detected.
>>> Check installed base version
Version 23.7 is correct.
>>> Check for missing or altered base files
No problems detected.
>>> Check installed repositories
OPNsense
>>> Check installed plugins
os-crowdsec 1.0.6
os-theme-rebellion 1.8.8
os-wireguard-go 1.13_6
>>> Check locked packages
No locks found.
>>>

Check for missing package dependencies
Checking all packages: .......... done
php81-pecl-mongodb has a missing dependency: php81
>>> Check for missing or altered package files
Checking all packages: .......... done
>>> Check for core packages consistency
Core package "opnsense" has 67 dependencies to check.
Checking packages: .................................................................... done
***DONE***

Did you remove this one already ?

Code Select Expand

pkg remove php80-pecl-mongodb

If not do the opnsense-update -u after removing it.

Ran the command but the package was already removed.

I meant a screenshot with the remaining installed packages...

Try this command and see if it gets rid of it for you.

Code Select Expand

pkg autoremove


If still having some of those packages do this

Code Select Expand

pkg delete package_name


When you're done cleaning up complete the upgrade

Code Select Expand

opnsense-update -u

Update:
1 - pkg autoremove didn't make any changes

2 - pkg delete  - I was successfully able to remove all of the Sunnvalley packages.

3 - opnsense-update -u "No known packages set to fetch was specified."

The PHP warning "Unable to load dynamic library 'mongodb.so' (tried: /usr/local/lib/php/20220829/mongodb.so")

I am pretty sure that when I installed Zenarmour I chose to user the other (Elastic?) for the db. I looked for the mongodb.so at /usr/local/lib/php/20220829/ and it is definitely not there.

Any suggestions?

Thanks!

A screenshot would be helpul

PHP Errors:
/local/lib/php/20220829/mongodb.so.so (Cannot open "/usr/local/lib/php/20220829/mongodb.so.so")) in Unknown on line 0

You can remove it all, then retry the upgrade.

How would I go about removing them? I only see the option to reinstall or lock.

I already have 23.7 running.