Topics

1

23.1 Legacy Series / [Issue] Unable to get WAN IP Lease after upgrade from 22.7 to 23.1

« on: January 27, 2023, 05:32:54 pm »

Appliance:

• Baremetal
• TopTon I-225V
• WAN on vlan300 (for ISP)
• All Interfaces on the 4-Port LACP LAGG

It was connected to a 4 Port LACP LAGG on my 48-US-500W switch and ran multiple VLANs for months without issue. From the moment I upgraded I was no longer able to get WAN IP. Before I resort to fully restoring a back-up I'm attempting to resolve it and would like some support. I have internet access through alternative modem to upload information if needed.

What I've tried already based on other posts:

• Resetting the tunable table back to default and rebooting
• Unplugging everything for 2 hours and trying again
• Manually creating gateways and routes
• Restarting services
• Manually releasing, renewing DHCP lease
• Removing and re-adding the interface
• Partial restores for gateways, routes, interfaces and firewall rules
• Booting up old router and using manual routes and gateway to provide opnsense instance internet to pull updates

The logs unfortunately do not tell much:

Code: [Select]

<13>1 2023-01-27T12:52:48+01:00 renamed.mirabis.home opnsense 83364 - [meta sequenceId="1"] /interfaces.php: ROUTING: entering configure using 'wan'
<13>1 2023-01-27T12:52:48+01:00 renamed.mirabis.home opnsense 83364 - [meta sequenceId="2"] /interfaces.php: plugins_configure monitor (,default)
<13>1 2023-01-27T12:52:48+01:00 renamed.mirabis.home opnsense 83364 - [meta sequenceId="3"] /interfaces.php: plugins_configure monitor (execute task : dpinger_configure_do(,default))
<13>1 2023-01-27T12:52:48+01:00 renamed.mirabis.home opnsense 83364 - [meta sequenceId="4"] /interfaces.php: plugins_configure ipsec (,wan)
<13>1 2023-01-27T12:52:48+01:00 renamed.mirabis.home opnsense 83364 - [meta sequenceId="5"] /interfaces.php: plugins_configure ipsec (execute task : ipsec_configure_do(,wan))
<13>1 2023-01-27T12:52:48+01:00 renamed.mirabis.home opnsense 83364 - [meta sequenceId="6"] /interfaces.php: plugins_configure dhcp ()
<13>1 2023-01-27T12:52:48+01:00 renamed.mirabis.home opnsense 83364 - [meta sequenceId="7"] /interfaces.php: plugins_configure dhcp (execute task : dhcpd_dhcp_configure())
<13>1 2023-01-27T12:52:48+01:00 renamed.mirabis.home opnsense 83364 - [meta sequenceId="8"] /interfaces.php: plugins_configure dns ()
<13>1 2023-01-27T12:52:48+01:00 renamed.mirabis.home opnsense 83364 - [meta sequenceId="9"] /interfaces.php: plugins_configure dns (execute task : dnsmasq_configure_do())
<13>1 2023-01-27T12:52:48+01:00 renamed.mirabis.home opnsense 83364 - [meta sequenceId="10"] /interfaces.php: plugins_configure dns (execute task : unbound_configure_do())
<13>1 2023-01-27T12:52:49+01:00 renamed.mirabis.home opnsense 83364 - [meta sequenceId="11"] /interfaces.php: ROUTING: entering configure using defaults
<13>1 2023-01-27T12:52:49+01:00 renamed.mirabis.home opnsense 83364 - [meta sequenceId="12"] /interfaces.php: plugins_configure monitor (,)
<13>1 2023-01-27T12:52:49+01:00 renamed.mirabis.home opnsense 83364 - [meta sequenceId="13"] /interfaces.php: plugins_configure monitor (execute task : dpinger_configure_do(,))
<13>1 2023-01-27T12:52:50+01:00 renamed.mirabis.home opnsense 83364 - [meta sequenceId="14"] /interfaces.php: plugins_configure newwanip (,wan)
<13>1 2023-01-27T12:52:50+01:00 renamed.mirabis.home opnsense 83364 - [meta sequenceId="15"] /interfaces.php: plugins_configure newwanip (execute task : dnsmasq_configure_do())
<13>1 2023-01-27T12:52:50+01:00 renamed.mirabis.home opnsense 83364 - [meta sequenceId="16"] /interfaces.php: plugins_configure newwanip (execute task : ntpd_configure_do())
<13>1 2023-01-27T12:52:50+01:00 renamed.mirabis.home opnsense 83364 - [meta sequenceId="17"] /interfaces.php: plugins_configure newwanip (execute task : opendns_configure_do())
<13>1 2023-01-27T12:52:50+01:00 renamed.mirabis.home opnsense 83364 - [meta sequenceId="18"] /interfaces.php: plugins_configure newwanip (execute task : openssh_configure_do(,wan))
<13>1 2023-01-27T12:52:50+01:00 renamed.mirabis.home opnsense 83364 - [meta sequenceId="19"] /interfaces.php: plugins_configure newwanip (execute task : unbound_configure_do(,wan))
<13>1 2023-01-27T12:52:50+01:00 renamed.mirabis.home opnsense 83364 - [meta sequenceId="20"] /interfaces.php: plugins_configure newwanip (execute task : vxlan_configure_do())
<13>1 2023-01-27T12:52:50+01:00 renamed.mirabis.home opnsense 83364 - [meta sequenceId="21"] /interfaces.php: plugins_configure newwanip (execute task : webgui_configure_do(,wan))
<27>1 2023-01-27T12:53:04+01:00 renamed.mirabis.home dhclient 41087 - [meta sequenceId="22"] connection closed
<26>1 2023-01-27T12:53:04+01:00 renamed.mirabis.home dhclient 41087 - [meta sequenceId="23"] exiting.
Interfaces as follows:

Code: [Select]

00_LAN (lagg0)  -> v4: 192.168.2.1/24
 10_Guests (lagg0_vlan10) -> v4: 10.0.10.1/24
 20_Lab (lagg0_vlan20) -> v4: 10.0.20.1/24
 30_MGM (lagg0_vlan30) -> v4: 10.0.30.1/24
 40_Users (lagg0_vlan40) -> v4: 10.0.40.1/24
 50_CORP (lagg0_vlan50) -> v4: 10.0.50.1/24
 60_IoT (lagg0_vlan60) -> v4: 10.0.60.1/24
 90_WireGuard (wg1) -> v4: 10.0.90.1/24
 300_WAN (lagg0_vlan300) -> v4/DHCP4: 0.0.0.0/8

Already pulled opnsense-patch 4e3c00a674796 for the IPSEC error message even though I did not use IPSEC as shown in other post on forum here.


lscpu

Code: [Select]

root@OPNsense:~ # lscpu
Architecture:            amd64
Byte Order:              Little Endian
Total CPU(s):            4
Thread(s) per core:      1
Core(s) per socket:      4
Socket(s):               1
Vendor:                  GenuineIntel
CPU family:              6
Model:                   156
Model name:              Intel(R) Pentium(R) Silver N6005 @ 2.00GHz
Stepping:                0
L1d cache:               32K
L1i cache:               32K
L2 cache:                1536K
L3 cache:                4M
Flags:                   fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 cflsh ds acpi mmx fxsr sse sse2 ss htt tm pbe sse3 pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 sdbg cx16 xtpr pdcm sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline aes xsave osxsave rdrnd fsgsbase tsc_adjust fp_dp smep erms fpcsds pqe rdseed smap clflushopt clwb intel_pt umip syscall nx rdtscp lm lahf_lm

Some boot info

Code: [Select]

CPU: Intel(R) Pentium(R) Silver N6005 @ 2.00GHz (1996.80-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x906c0  Family=0x6  Model=0x9c  Stepping=0
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x4ff8ebbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,RDRAND>
  AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
  AMD Features2=0x101<LAHF,Prefetch>
  Structured Extended Features=0x2394a2c3<FSGSBASE,TSCADJ,FDPEXC,SMEP,ERMS,NFPUSG,PQE,RDSEED,SMAP,CLFLUSHOPT,CLWB,PROCTRACE,SHA>
  Structured Extended Features2=0x18400124<UMIP,WAITPKG,GFNI,RDPID,MOVDIRI,MOVDIR64B>
  Structured Extended Features3=0xfc000400<MD_CLEAR,IBPB,STIBP,L1DFL,ARCH_CAP,CORE_CAP,SSBD>
  XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
  IA32_ARCH_CAPS=0x6b<RDCL_NO,IBRS_ALL,SKIP_L1DFL_VME,MDS_NO>
  VT-x: (disabled in BIOS) PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr
  TSC: P-state invariant, performance statistics
real memory  = 17179869184 (16384 MB)
avail memory = 16419983360 (15659 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <ALASKA A M I >
WARNING: L1 data cache covers fewer APIC IDs than a core (0 < 1)
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"