Messages

Cheers i will give it a month

I have no idea what  Suricata 7 IPS is lol
I have Google Drive setup does it need disabling prior to update.
Would it better to leave it a few weeks prior to update IYHO?

HI Franco
Thank you for you response is it safe to update or should i wait as i see several issues being reported.

HI Guys
I tried a update this morning saying it was a hotfix but during the small update i had an error popup see attachment
Full log do i need to revert https://logs.notifiarr.com/?4dfc41f44bf3a39b#HmJSTGDRXEH2JpzJJ5TsFY2mG9h4WPZHL5n6Uj15H1HD 

It looks like i need to update to 24.1 but not sure if i should if i have had this error.
https://i.imgur.com/ryLAxiz.png

Also if the update from the WebUI ok to do?

Hi
I had an issue with the Adguard plugin before this that affected many other users.
So i had a bad couple of last 2 upgrades but it looks more like addons / plugins not OPNsense.
O do i mark this as solved ?

HI
Thank you for your help great community.Is it best to check in here before upgrading in future ?

So do I  ssh into OPnsesne cli run kill -9 3338 again
Then go back to terminal options and update from cli ?
Is this the preferred option?

HI Franco
Great thank you for the help
But now i see another update
https://i.imgur.com/WyYxfsZ.png

Is this going to cause same issue?

HI
Please can you tell me how to do this
I have tried crowdsec -c /var/run/crowdsec.sock stop
From cli but does not work!

Also i cannot find shell in GUI area
I have disabled crodsec bouncer in gui and stopped crodsec then tried rebooting still stuck in cli on


The system will reboot. Do you want to proceed? [y/N]: y

>>> Invoking stop script 'beep'
>>> Invoking stop script 'freebsd'
crowdsec not running? (check /var/run/crowdsec.pid).
Stopping crowdsec_firewall.
Waiting for PIDS: 3338

HI Guys

Not sure what the issues are lately having had over 12 months of updates with no issues.The last 2 have been a nightmare i am trying to update today and it is just hanging for 40 min on the last part see here

Terminal Log https://paste.centos.org/view/ebd14956

I know it said reboot required but should it not perform this option itself or do i need to do a manual reboot?

What is the issue and how do i fix it?

Update audit log see https://paste.centos.org/view/fdf75ed2

I have rebooted as mentioned it has started up with crowdsec stopped but the updater is still spinning?

https://i.imgur.com/xpaabLS.png

https://i.imgur.com/gsRLkhc.png

So crowdsec is stopped but still cannot get out of update loop please could somebody help me?

I have also tried a reboot from CLI but gets stuck onPIDS:3338

  0) Logout                              7) Ping host
  1) Assign interfaces                   8) Shell
  2) Set interface IP address            9) pfTop
  3) Reset the root password            10) Firewall log
  4) Reset to factory defaults          11) Reload all services
  5) Power off system                   12) Update from console
  6) Reboot system                      13) Restore a backup

Enter an option: 6

The system will reboot. Do you want to proceed? [y/N]: y

>>> Invoking stop script 'beep'
>>> Invoking stop script 'freebsd'
crowdsec not running? (check /var/run/crowdsec.pid).
Stopping crowdsec_firewall.
Waiting for PIDS: 3338

HI Guys
No idea what has happened i have  OPNsesne 192.168.23.1 on a Zimma Board not had any issues and not even touched it for weeks.
I was working on a Proxmox Server 192.168.23.199 this was rebooted and after that i lost my local access to everything?
I cannot access this server with GUI because it is having issues on boot see https://photos.app.goo.gl/YMzT1mXuASmovPhs9
After this it then goes to login username and password on screen but no GUI and no access.
But after this issue i have lost access to my OPNsesne GUI login but i can access via terminal but not on wifi  or lan no idea why it would mess up OPNsense also lost access to my Unraid server 192.168.23.100.
Anybody any idea how i can start to trouble shoot the mess?
But i do have external internet!

Thank you for your help my original thought was it may be ok.
But was told by several people it was bad config of my dhcp!!

I have it setup like this due to previous setup on my old DD-wrt router and all my devices coded into Home Assistant yaml file.
I have Within the Avaiable Range i have Static Leases 192.168.23.1 - 192.168.23.9 I have my OPNsense & Wifi Router Static
But my leased devices have always been on the current IP's and this would have meant a lot of messing in HA

Not sure how to mark as solved but than you again

HI
Thank you so should i set it to longer than 2 hours?
Also reduce the level of what i see?
I only asked as i get conflicting advice from other users who say they are experienced/
As you can see i have my range set to handout none static from 10 to 99
So i have available 100 to 254 to set as static if needed.
But some say i have dhcp set up incorrectly so i am torn between advice

Please could you point me to where i set time for prolongation if this needs adjusting in your opinion also where do i adjust the logs or do i just set to see errors?

Do the logs get purged or just keep growing?

HI Guys

I have had OS running for a few months with help from here and it has been solid no logs nothing.
I have not messed with it but i have started seeing logs popping up do i need to do anything to fix the issue?

Info Logs 100's like this over past few days



I only ask as my other friends with OPNsense do not see these logs

Main message x 55000 times see https://i.imgur.com/V7WYMDR.png

Other Info https://i.imgur.com/XoJSCLO.png

Debug message https://i.imgur.com/yO1eTLI.png

Let me explain how i set it up and was advised it would be ok.
Avaiable Range 192.168.23.1 - 192.168.23.254
Range Set from 192.168.23.10 - 192.168.23.99 This is for OPNsense to allocate out
Within the Avaiable Range i have Static Leases 192.168.23.100 - 192.168.23.254
Within the Avaiable Range i have Static Leases 192.168.23.1 - 192.168.23.9 I have my OPNsense & Wifi Router Static
I only see 20 to 30 items being used within 10 to 99 but the logs are showing IP set in the static lease area !!

https://i.imgur.com/rhWEsnz.png

HI

After seeing these issues on this post https://forum.opnsense.org/index.php?topic=32900.0 .
So i updated to latest version and cleared logs but still seeing same logs messages on lots of  different device IP's
Is this ok or do i need to fix something ?

https://i.imgur.com/PUh2xp9.png