Messages

Thanks to the help of others in this group. I have the 850 installed. Last thing is to setup a VPN. When I install wireguard-go, It does not start! I can't find it in the log. Enable WireGuard is checked. Services show it as stopped.
Starting it just goes back to stop. The second wireguard will start. Just don't care for the warning about using it.

Thanks

Got it just before reading last post. Works better using screen. Does require a reset. No option to restore config. May just do fresh install..

Thanks so much for your help

Should have said tried that. Seems I'm getting close

no such option:

A -    Serial Device      : /dev/ttyUSB0  port
B - Lockfile Location     : /var/lock
C -   Callin Program      :   
D -  Callout Program :
E -    Bps/Par/Bits       : 115200 8N1
F - Hardware Flow Control : Yes       
G - Software Flow Control : No

Thank you for the help

I think I may have found it. but can't enter anything: no keyboard, nothing

Welcome to minicom 2.7.1

OPTIONS: I18n                                                               
Compiled on Dec 23 2019, 02:06:26.                                           
Port /dev/ttyUSB0, 06:57:30                                                 
                                                                             
Press CTRL-A Z for help on special keys

if I unplug the usb cable:  Cannot open /dev/ttyUSB0!

sorry, I was expecting a response from the computer. When something is connected to usb port.
Using lsusb I believe I have located it. Bus 004 Device 005: ID 04e2:1411 Exar Corp. XR21B1411
I am trying minicom just can't put it togather

thanks for the reply. I have the supplied usb cable, but it's black not blue. I get no response when plugged in.

Got my new DEC850, lasted about 30 minutes. Login web console first time no problem. Thought I could Migrate my config. Some were it went wrong. Can't access web console, don't understand how to use console port to usb. I am running ubuntu 22.04. Hobby user, over my head

I am not an Xpert! Thing about apple is: The mac address will change! Private Wi-Fi address. Have to set-up manually. It can be a fight!

Thank-you..

Somewhere along the line I have lost NTP. My time is off, can't figure it out.  Can't set it. Any suggestions?

OPNsense 22.10-amd64
FreeBSD 13.1-RELEASE-p5
OpenSSL 1.1.1q 5 Jul 2022

Thanks

This may have nothing to do with your problem, but because I've just spent hours trying to figure out how I locked myself out. Check out my post from before:

https://forum.opnsense.org/index.php?topic=31448.0

Thanks for the info! After locking myself out for quit a while, wan is no longer selected  ;D 

Just reading log file web gui. I have Error   lighttpd   (connections.c.716) invalid request-line -> sending Status 400 (104.248.230.**) about 30 times yesterday. As far as I no I have nothing open to wan

Thanks for the reply; I have Zenarmor. I was going to add them to black list.  Wast of time?