OPNsense
  • Home
  • Help
  • Search
  • Login
  • Register

  • OPNsense Forum »
  • Profile of tracerrx »
  • Show Posts »
  • Messages
  • Profile Info
    • Summary
    • Show Stats
    • Show Posts...
      • Messages
      • Topics
      • Attachments

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

  • Messages
  • Topics
  • Attachments

Messages - tracerrx

Pages: 1 ... 4 5 [6] 7 8 9
76
22.1 Legacy Series / Re: WAN interface flapping with 22.1.2
« on: May 05, 2022, 10:35:15 pm »
Looks like the intel em driver currently included is 7.6.1, but most recent intel in 7.7.8

Code: [Select]
dev.igb.0.iflib.driver_version: 7.6.1-k
However if we compile our own we would have to re-compile every time there is a kernel update I believe.

77
22.1 Legacy Series / Re: WAN interface flapping with 22.1.2
« on: May 05, 2022, 09:52:15 pm »
@edwin70 Don't tell my wife but I was wrong.. Just looked it up.. em drivers do support i211 and i210 in freebsd 13...

Code: [Select]

The em(4) driver supports Gigabit Ethernet adapters based on the Intel 82540, 82541ER, 82541PI, 82542, 82543, 82544, 82545, 82546, 82546EB, 82546GB, 82547, 82571, 82572, 82573, 82574, 82575, 82576, and 82580 controller chips:

    Intel Gigabit ET Dual Port Server Adapter (82576)

    Intel Gigabit VT Quad Port Server Adapter (82575)

    Intel Single, Dual and Quad Gigabit Ethernet Controller (82580)

    Intel i210 and i211 Gigabit Ethernet Controller

    Intel i350 and i354 Gigabit Ethernet Controller

    Intel PRO/1000 CT Network Connection (82547)

    Intel PRO/1000 F Server Adapter (82543)

    Intel PRO/1000 Gigabit Server Adapter (82542)

    Intel PRO/1000 GT Desktop Adapter (82541PI)

    Intel PRO/1000 MF Dual Port Server Adapter (82546)

    Intel PRO/1000 MF Server Adapter (82545)

    Intel PRO/1000 MF Server Adapter (LX) (82545)

    Intel PRO/1000 MT Desktop Adapter (82540)

    Intel PRO/1000 MT Desktop Adapter (82541)

    Intel PRO/1000 MT Dual Port Server Adapter (82546)

    Intel PRO/1000 MT Quad Port Server Adapter (82546EB)

    Intel PRO/1000 MT Server Adapter (82545)

    Intel PRO/1000 PF Dual Port Server Adapter (82571)

    Intel PRO/1000 PF Quad Port Server Adapter (82571)

    Intel PRO/1000 PF Server Adapter (82572)

    Intel PRO/1000 PT Desktop Adapter (82572)

    Intel PRO/1000 PT Dual Port Server Adapter (82571)

    Intel PRO/1000 PT Quad Port Server Adapter (82571)

    Intel PRO/1000 PT Server Adapter (82572)

    Intel PRO/1000 T Desktop Adapter (82544)

    Intel PRO/1000 T Server Adapter (82543)

    Intel PRO/1000 XF Server Adapter (82544)

    Intel PRO/1000 XT Server Adapter (82544)


78
22.1 Legacy Series / Re: WAN interface flapping with 22.1.2
« on: May 04, 2022, 03:35:43 pm »
@edwin70 I believe the updated drivers are only for the intel em not intel igb

79
22.1 Legacy Series / Re: WAN interface flapping with 22.1.2
« on: May 04, 2022, 02:47:18 pm »
@franco I understand the latency and the settings below have always worked in the past for hughesnet/viasat connection monitoring.  But previous to 22.x the high latency on wan2 never caused wan1 to be removed from the wan group. 

Latency thresholds: 1000 - 2500
Packet Loss thresholds: 30 - 60
Probe Interval: 15
Alert Interval: 60
Time Period: 60
Loss Interval: 4

80
22.1 Legacy Series / Re: WAN interface flapping with 22.1.2
« on: May 04, 2022, 02:28:25 pm »
@franco It seems to be related to dpinger. 

All my links have a primary low latency connection, and a secondary satellite connection that's higher latency (starlink 40-100ms or hughesnet 700-1500ms).  Even though I have accounted for the higher latency in the gateway monitor settings for each satellite connection, the high latency on the secondary link seems to be making dpinger miss responses on the low latency primary link.  This did NOT occur in the 21.x series, and was introduced in 22.x (FreeBSD 13).  Disabling gateway monitoring on the secondary connections seems to resolve the flapping of the primary link.

FWIW, these are all Protectli FW4 and FW6, no mac spoofing, Suricata on LAN, Dual WAN

81
22.1 Legacy Series / Disable State Killing on Gateway Failure
« on: May 01, 2022, 03:04:07 am »
What happened to the "Disable State Killing on Gateway Failure"?  I can't finD the option for this in 22.1.6

82
22.1 Legacy Series / Re: WAN interface flapping with 22.1.2
« on: April 29, 2022, 06:02:00 pm »
@subivoodoo Sam issues as the others here... dpinger will state that the gateway is down, remove it from the fail-over group from 10  - 120 seconds, then put it back.  Happens repeatedly until you go in and change the gateway monitor IP, then it stabilizes for 3-4 days.  Rinse repeat.  However when dpinger says gateway is down, it is in fact not down.  I have increased all my thresholds but problem still occurs.

83
22.1 Legacy Series / Re: OPNsense loosing WAN IP several times daily
« on: April 29, 2022, 05:32:56 pm »
Take a look at this thread... https://forum.opnsense.org/index.php?topic=27299.60

84
22.1 Legacy Series / Re: WAN interface flapping with 22.1.2
« on: April 27, 2022, 03:19:12 pm »
@subivoodoo Except I am having this issue and I don't use any MAC Spoofing.

85
22.1 Legacy Series / Re: Gateway group switching, gateway is offline even though its online
« on: April 26, 2022, 03:00:19 pm »
Also make sure you have settings->general->gateway switching ernabled

86
22.1 Legacy Series / Re: Gateway group switching, gateway is offline even though its online
« on: April 26, 2022, 02:59:03 pm »
Lots of us are having a similar issue... see this thread: https://forum.opnsense.org/index.php?topic=27299.0

87
22.1 Legacy Series / Re: WAN interface flapping with 22.1.2
« on: April 24, 2022, 11:01:39 pm »
A quick google search turns up a past issue between the intel igb driver/freebsd and people using coreboot bios... I do use coreboot, anyone else?  We need to find some sort of commonality for @franco and team to replicate. Nothing has changed in my setups with the exception of upgrading from 21 to 22.

My setup (multiple locations that have this problem )
- Dual WAN (Comcast/Xfinity [Primary] + Satellite [starlink or hughesnet] )  Some are static IP others are DHCP
- WAN setup for failover
- Surricata on the Lan
- Intel igb210 & igb211
- No MAC spoofing
- Multiple vLans on LAN
- Multiple OpenVPN site to site tunnels
- Wiregaurd (go) on primary WAN
- Protectli FW4 + FW6 boxes running Coreboot Bios
- Gateway monitoring ON
- MDNS Repeater on LAN/vLAN
- Wake on LAN on LAN
- No IPv6
- PowerD enabled w/ hiadaptive
- Monit Gateway alerting enabled

88
22.1 Legacy Series / Re: WAN interface flapping with 22.1.2
« on: April 24, 2022, 09:43:52 pm »
Everyone having this issue seems to be using intel nics, so maybe this is just a FreeBSD 13 driver issue? Anyone have a howto to install the updated intel drivers that are included in FreeBSD 13.1?

89
20.7 Legacy Series / Re: Updating Driver / Already loaded in Kernel
« on: April 20, 2022, 10:38:02 pm »
How do you do this in system tuneables?

90
22.1 Legacy Series / Re: WAN interface flapping with 22.1.2
« on: April 19, 2022, 08:08:06 pm »
Code: [Select]
sysctl -a | grep -E 'dev.(igb|ix|em).*.%desc:'
dev.igb.5.%desc: Intel(R) I211 (Copper)
dev.igb.4.%desc: Intel(R) I211 (Copper)
dev.igb.3.%desc: Intel(R) I211 (Copper)
dev.igb.2.%desc: Intel(R) I211 (Copper)
dev.igb.1.%desc: Intel(R) I211 (Copper)
dev.igb.0.%desc: Intel(R) I211 (Copper)

sysctl -a | grep -E 'dev.(igb|ix|em).*.%desc:'
dev.igb.3.%desc: Intel(R) I210 Flashless (Copper)
dev.igb.2.%desc: Intel(R) I210 Flashless (Copper)
dev.igb.1.%desc: Intel(R) I210 Flashless (Copper)
dev.igb.0.%desc: Intel(R) I210 Flashless (Copper)

Pages: 1 ... 4 5 [6] 7 8 9
OPNsense is an OSS project © Deciso B.V. 2015 - 2024 All rights reserved
  • SMF 2.0.19 | SMF © 2021, Simple Machines
    Privacy Policy
    | XHTML | RSS | WAP2