Messages

31

21.1 Legacy Series / Re: VLAN to VLAN FW allow

« on: March 15, 2021, 10:05:28 am »

THank you!  I seem to be reading the interface direction the wrong way and I had to move the rule in the order as well, but this seems to have fixed it.

32

21.1 Legacy Series / Re: VLAN to VLAN FW allow

« on: March 15, 2021, 09:59:47 am »

Sorry had already tried that as well and no go..

So on secure interface (vlan 10)

Direction in or out ?

33

21.1 Legacy Series / Re: VLAN to VLAN FW allow

« on: March 15, 2021, 09:55:18 am »

.

34

21.1 Legacy Series / Re: VLAN to VLAN FW allow

« on: March 15, 2021, 09:54:58 am »

.

35

21.1 Legacy Series / Re: VLAN to VLAN FW allow

« on: March 15, 2021, 09:54:37 am »

Secure Network = vlan10
Guest = VLan 15

36

21.1 Legacy Series / Re: VLAN to VLAN FW allow

« on: March 15, 2021, 09:45:02 am »

Thanks, just tried that, still nothing.

I suspect it could be a routing issue as if I do a trace from vlan10 to vlan15 it actually tries to go out of the WAN (internet) interface rather than guest network 192.16.15.1 IP/interface

37

21.1 Legacy Series / VLAN to VLAN FW allow

« on: March 15, 2021, 08:22:34 am »

Hi,

This should be a simple rule but for some reason it aint working, I'll give a rundown of my setup :

VLAN 10 (Secure)
VLAN 15 (Guest)

Pc on vlan 15 with ip 192.168.15.55

I want to be able to pc 192.168.15.55 (3389) from a range of PCs on VLAN 10.

I thought it would've been a simple addition of a FW rule in the GuestNetwork in FW rules allowing this, but it doesn't seem to work, for some reason the traffic is coming from my WAN interface (Internet) instead of the internal network (VLAN 10).

Any ideaS?
 

38

21.1 Legacy Series / Re: Backups To Google broken ?

« on: March 05, 2021, 12:41:20 am »

Thanks Priller, I think thats what my issue is, I wasn't aware of that.  I've just done a small test with a change, so will see if it backs up overnight if it does, problem solved!

39

21.1 Legacy Series / Re: Backups To Google broken ?

« on: March 03, 2021, 11:46:45 pm »

Hmmm or so I thought, it worked once after the reboot now it's failed again.

Logs show no backups until I manually did one this morning.

Any ideas on where to start?

I may reconfigure the job and see if that helps.

40

21.1 Legacy Series / Re: Backups To Google broken ?

« on: February 27, 2021, 01:04:36 am »

Panic over, reboot seems to have fixed it 

41

21.1 Legacy Series / Re: Backups To Google broken ?

« on: February 25, 2021, 08:33:33 am »

No probs, I might give the router a reboot and see if that clears anything.

42

21.1 Legacy Series / Backups To Google broken ?

« on: February 25, 2021, 05:42:40 am »

Hi,

I've just noticed that my daily overnight backups of the config file to Google have stopped working for some reason, settings are fine because if I go in and do a manual backup it uploads to Google just fine.

Any ideas on where to start looking , last successful backup was a manual one I did on 22/2/21 @ 10:03am none have gone up since.

43

20.7 Legacy Series / Re: GEOip list update interval

« on: January 28, 2021, 02:10:24 am »

Alias DB is getting updated fine when I use IP block lists every 24 hours, just not sure about GeoIP from maxmind, what log files should I be looking at to see when/what this interval is ?

44

20.7 Legacy Series / GEOip list update interval

« on: January 27, 2021, 03:14:40 am »

Hi,

How often does the GEOip list under Firewall>Aliases>GEOIp setting?  Is it every 24 hours or ?

Thanks

45

20.7 Legacy Series / Re: Unbound DNS Upstream TLS option

« on: January 27, 2021, 03:08:30 am »

Works for me, Services > Unbound DNS > Misc > DNS over TLS servers, put them in as 1.1.1.1@853 and 1.0.0.1@853

I also had to uncheck the box in Service > Unbound DNS > General (DNS Query forwarding).