Messages

1

20.7 Legacy Series / Re: Port Forwarding

« on: January 22, 2021, 04:23:12 pm »

My ISP was using CG Nat a few months ago. I asked them and they gave me a public IP Address, and since then I've opened ports without any trouble using OpenWRT.

They changed some config because now i can't open ports neither in OpenWRT or OpnSense. I'll talk with my ISP because it's so rare.

Thank you all of you for your help.

2

20.7 Legacy Series / Re: Port Forwarding

« on: January 15, 2021, 05:03:07 pm »

Hello,
Thanks for your answer.
This is the Wan rule: https://i.imgur.com/ucRDzX1.png
And here we can see correctly created: https://i.imgur.com/Kbkfsw7.png

Do I have something wrong?

3

20.7 Legacy Series / Port Forwarding

« on: January 12, 2021, 08:55:14 pm »

Hello,
I'm trying to open a range of ports and I can't get it to work.
I've been following this tutorial without success: https://forum.opnsense.org/index.php?topic=8783.0

I'm testing opened ports through an external website. I hope this is fine.

See attached images for more info.
https://i.imgur.com/Tr9qBgZ.png
https://i.imgur.com/KH4gZZI.png

Any help?

Thanks.

4

20.1 Legacy Series / Re: Timeout while connecting to the selected mirror opnsense [Resolved]

« on: January 07, 2021, 09:15:20 pm »

Thanks for this fix. I was having the same problem after an upgrade.

5

20.7 Legacy Series / Re: Testing Shaper

« on: January 07, 2021, 08:53:49 pm »

@LornMalvo I can't find the thread but it was confirmed that there is a bug with the traffic shaper.

The higher the bandwidth limit the more it drifts off.

I'm also affected by it but it doesn't bother me.

Hi. Thanks for the info. I was sure this is a bug. I posted this with the hope devs can see this.

6

20.7 Legacy Series / Testing Shaper

« on: December 30, 2020, 04:47:39 pm »

Hello,
I've installed OPNSense for the first time a few days ago and I'm doing some testing on QoS.

I've followed tutorials and created a Pipe because I want to limit bandwith. I have 600/600 optic fiber and I configured a bandwith limit of 550Mbit/s. When i do some download and upload tests, i get a maximum speed of 300Mbit/s +/-. It seems like the Pipe speed isn't working well, if I want to reach the 550Mbit/s target, I have to put a bandwith limit of 700 instead of 550.

I am doing something wrong or is this a bug?

Thanks.