Messages

I am doing everything as i have been told so far but no luck

I am getting demoralised, so I have installed softether and trying a different solution. it seems that many people have problems with wireguard on OPNsense even in Reddit.

No i have different problems with Softether which ill open a post for

and here i tried a ping from sense 100% loss
https://ibb.co/L5s70SV

Hi,
sorry but I live in SE asia so apologies for the late reply.

i can only ping 10.0.7.20 from my laptop nothing else works.

I really dont know where its going wrong

Thank you very much, i applied the changes and still not receiving on my client side.

Here is the live log
https://ibb.co/9NRjyGy


and this

https://ibb.co/xz94qLr

here are the screen shots, ill get the logs in a min

Thank you for this

Hi guys,

I am pretty new to OPNsense but you guys seem very quick at responding.

So my setup is a baremetal server running 20.7 OPNsense.
I am really trying hard to get the Wireguard VPN to work but really having zero luck, even paid pro engineers to help and they couldn't do it.
So here is why I am baffled... the server sees my client which im using the official windows app for as it shows my IP correctly and seems to be sending and receiving. I have attached to images for you to see. But on my laptop I am not receiving anything thus have no connection, i cant ping the server or anything like that. I have used WG on my laptop before without issues. I have followed multiple guides restarted multiple times but still no luck.
Has there been anyone else who may have had a similar experience.
https://ibb.co/71qr7zW
https://ibb.co/0B6fCzg

I am to the point that I have to reconsider OPNsense completely. I flirted with Softether too as you may recall from my post yesterday but even that seemed to have a lot a trouble. But I have simply spent too much time to just give up on it so please any help would be so useful right now.


Thanks again in advance for anyone who can guess what is wrong.

This is solved Thank you for your help.

I will try to get them to restore from a backup I have made. Fingers crossed.

I think they do have access to a console, can you share the command to uninstall softether?

Thank you very much.

Thanks for the reply but its bare metal server is in a data centre which I do not have physical access to.

Is there another way?

Again thank you for your reply.

Hi guys, I have working on a mini project for about 2 months now and now I am at this stage where I have a baremetal server running OPNsense 20.7 and I was naughty and installed SoftetherVPN via shell but afterwards i disabled the SHH access.

But what I stupidly did was at first bridged the LAN then after I did the same for WAN and now I am locked out the server. I cant log in with Softether on any of its ports and I cant load my OPNsense gui anymore either.

I would like to know if there is a way to salvage this or a way to disable I was to contact the ISP and see if the can do it via CLI? or even better if I can revive it?

I am really out of ideas and so your advice would be greatly appreciated.

If the only way is to have the ISP connect to it what do they have to type in the shell in order to diable Softether??

Or worst case do I have no choice but to reinstall it?