Messages

1

21.7 Legacy Series / Captive Portal with multiple users on single IP address/machine

« on: September 04, 2021, 08:44:30 am »

Hi there

I am now using OpnSense and captive portal feature to serve the login the users to Internet. It works like a charm for a single user/single machine, but for many users on single machine, it always bypasses the portal (only a user that needs to be authenticated and authorized to use the Internet). The example is like from a Terminal Server or RDP/RDSH (Windows Remote Desktop Session Host).

Can OpnSense be used to authenticate every single user even though it resides on single interface/machine? 🤔

Thanks.

2

Hardware and Performance / Re: Poor Throughput (Even On Same Network Segment)

« on: September 03, 2020, 06:00:35 am »

Hi, Newbie here. 

I also notice this problem with OpnSense v 20.7.2 which was released recently. I got only about 450 Mbps in my LAN, when no one uses it besides me (I disconnect every downlink devices). I use iPerf3 on Windows to check it out.

Code: [Select]

PS E:\Util> .\iperf3.exe -c 192.168.10.8 -p 26574
Connecting to host 192.168.10.8, port 26574
[  4] local 192.168.12.4 port 50173 connected to 192.168.10.8 port 26574
[ ID] Interval           Transfer     Bandwidth
[  4]   0.00-1.00   sec  49.1 MBytes   412 Mbits/sec
[  4]   1.00-2.00   sec  52.5 MBytes   440 Mbits/sec
[  4]   2.00-3.00   sec  51.8 MBytes   434 Mbits/sec
[  4]   3.00-4.00   sec  52.4 MBytes   439 Mbits/sec
[  4]   4.00-5.00   sec  52.1 MBytes   438 Mbits/sec
[  4]   5.00-6.00   sec  52.6 MBytes   441 Mbits/sec
[  4]   6.00-7.00   sec  52.4 MBytes   440 Mbits/sec
[  4]   7.00-8.00   sec  46.4 MBytes   389 Mbits/sec
[  4]   8.00-9.00   sec  49.0 MBytes   411 Mbits/sec
[  4]   9.00-10.00  sec  51.6 MBytes   433 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bandwidth
[  4]   0.00-10.00  sec   510 MBytes   428 Mbits/sec                  sender
[  4]   0.00-10.00  sec   510 MBytes   428 Mbits/sec                  receiver

My hardware is an AMD Ryzen 7 2700 with 16 GB of RAM. Ethernet is Intel i350T2 Ethernet with Gigabit.