1
High availability / Re: CARP with Dialup interfaces: how to use "Disconnect dialup interfaces"?
« on: February 09, 2024, 10:45:50 pm »
Same Problem here.
Any suggestions?
Any suggestions?
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1]
2
20.7 Legacy Series / Re: freeradius does not start with DHCP enabled.
« on: August 28, 2020, 06:53:53 pm »
alright. take your time 
3
20.7 Legacy Series / Re: freeradius does not start with DHCP enabled.
« on: August 27, 2020, 01:55:25 am »
4
20.7 Legacy Series / Re: freeradius does not start with DHCP enabled.
« on: August 16, 2020, 01:51:39 pm »
ok should fit my need too
5
20.7 Legacy Series / Re: freeradius does not start with DHCP enabled.
« on: August 16, 2020, 12:31:24 pm »
ty.
Btw one question I know its offtopic but maybe you know and can answer.
Will it work to use radius dhcp together with openvpn to connect my phones to my network from remote?
Btw one question I know its offtopic but maybe you know and can answer.
Will it work to use radius dhcp together with openvpn to connect my phones to my network from remote?
6
20.7 Legacy Series / Re: freeradius does not start with DHCP enabled.
« on: August 16, 2020, 09:54:46 am »7
20.7 Legacy Series / Re: freeradius does not start with DHCP enabled.
« on: August 15, 2020, 10:51:20 pm »Code: [Select]
root@OPNsense:~ # radiusd -X
FreeRADIUS Version 3.0.21
Copyright (C) 1999-2019 The FreeRADIUS server project and contributors
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License
For more information about these matters, see the file named COPYRIGHT
Starting - reading configuration files ...
including dictionary file /usr/local/share/freeradius/dictionary
including dictionary file /usr/local/share/freeradius/dictionary.dhcp
including dictionary file /usr/local/share/freeradius/dictionary.vqp
including dictionary file /usr/local/etc/raddb/dictionary
including configuration file /usr/local/etc/raddb/radiusd.conf
including configuration file /usr/local/etc/raddb/proxy.conf
including configuration file /usr/local/etc/raddb/clients.conf
including files in directory /usr/local/etc/raddb/mods-enabled/
including configuration file /usr/local/etc/raddb/mods-enabled/attr_filter
including configuration file /usr/local/etc/raddb/mods-enabled/cache_eap
including configuration file /usr/local/etc/raddb/mods-enabled/chap
including configuration file /usr/local/etc/raddb/mods-enabled/date
including configuration file /usr/local/etc/raddb/mods-enabled/detail
including configuration file /usr/local/etc/raddb/mods-enabled/detail.log
including configuration file /usr/local/etc/raddb/mods-enabled/digest
including configuration file /usr/local/etc/raddb/mods-enabled/dynamic_clients
including configuration file /usr/local/etc/raddb/mods-enabled/eap
including configuration file /usr/local/etc/raddb/mods-enabled/echo
including configuration file /usr/local/etc/raddb/mods-enabled/exec
including configuration file /usr/local/etc/raddb/mods-enabled/expiration
including configuration file /usr/local/etc/raddb/mods-enabled/expr
including configuration file /usr/local/etc/raddb/mods-enabled/files
including configuration file /usr/local/etc/raddb/mods-enabled/linelog
including configuration file /usr/local/etc/raddb/mods-enabled/logintime
including configuration file /usr/local/etc/raddb/mods-enabled/mschap
including configuration file /usr/local/etc/raddb/mods-enabled/ntlm_auth
including configuration file /usr/local/etc/raddb/mods-enabled/pap
including configuration file /usr/local/etc/raddb/mods-enabled/passwd
including configuration file /usr/local/etc/raddb/mods-enabled/preprocess
including configuration file /usr/local/etc/raddb/mods-enabled/radutmp
including configuration file /usr/local/etc/raddb/mods-enabled/realm
including configuration file /usr/local/etc/raddb/mods-enabled/replicate
including configuration file /usr/local/etc/raddb/mods-enabled/soh
including configuration file /usr/local/etc/raddb/mods-enabled/sradutmp
including configuration file /usr/local/etc/raddb/mods-enabled/unix
including configuration file /usr/local/etc/raddb/mods-enabled/always
including configuration file /usr/local/etc/raddb/mods-enabled/unpack
including configuration file /usr/local/etc/raddb/mods-enabled/utf8
including configuration file /usr/local/etc/raddb/mods-enabled/counter
including configuration file /usr/local/etc/raddb/mods-enabled/dhcp_sqlippool
including configuration file /usr/local/etc/raddb/mods-config/sql/ippool-dhcp/mysql/queries.conf
/usr/local/etc/raddb/mods-enabled/dhcp_sqlippool[26]: Reference "${..pool_name}" not found
/usr/local/etc/raddb/mods-enabled/dhcp_sqlippool[30]: Reference "${..pool_name}" not found
/usr/local/etc/raddb/mods-enabled/dhcp_sqlippool[32]: Reference "${..pool_name}" not found
including configuration file /usr/local/etc/raddb/mods-enabled/ldap
including configuration file /usr/local/etc/raddb/mods-enabled/sql
including configuration file /usr/local/etc/raddb/mods-enabled/sqlippool
including files in directory /usr/local/etc/raddb/policy.d/
including configuration file /usr/local/etc/raddb/policy.d/accounting
including configuration file /usr/local/etc/raddb/policy.d/canonicalization
including configuration file /usr/local/etc/raddb/policy.d/control
including configuration file /usr/local/etc/raddb/policy.d/cui
including configuration file /usr/local/etc/raddb/policy.d/debug
including configuration file /usr/local/etc/raddb/policy.d/dhcp
including configuration file /usr/local/etc/raddb/policy.d/eap
including configuration file /usr/local/etc/raddb/policy.d/filter
including configuration file /usr/local/etc/raddb/policy.d/moonshot-targeted-ids
including configuration file /usr/local/etc/raddb/policy.d/operator-name
including configuration file /usr/local/etc/raddb/policy.d/rfc7542
including configuration file /usr/local/etc/raddb/policy.d/abfab-tr
including files in directory /usr/local/etc/raddb/sites-enabled/
including configuration file /usr/local/etc/raddb/sites-enabled/inner-tunnel
including configuration file /usr/local/etc/raddb/sites-enabled/default
including configuration file /usr/local/etc/raddb/sites-enabled/dhcp
/usr/local/etc/raddb/mods-enabled/dhcp_sqlippool[26]: Reference "${..pool_name}" not found
Errors reading or parsing /usr/local/etc/raddb/radiusd.conf
Code: [Select]
root@OPNsense:~ # cat /usr/local/etc/raddb/radiusd.conf
prefix = /usr/local
exec_prefix = ${prefix}
sysconfdir = ${prefix}/etc
localstatedir = /var
sbindir = ${exec_prefix}/sbin
logdir = /var/log
raddbdir = ${sysconfdir}/raddb
radacctdir = ${logdir}/radacct
name = radiusd
confdir = ${raddbdir}
modconfdir = ${confdir}/mods-config
certdir = ${confdir}/certs
cadir = ${confdir}/certs
run_dir = ${localstatedir}/run/${name}
db_dir = ${raddbdir}
# libdir ends with an asterisk since package maintainer always appends the current version number to the directory name.
libdir = /usr/local/lib/freeradius-3*
pidfile = ${run_dir}/${name}.pid
correct_escapes = true
max_request_time = 30
cleanup_delay = 5
max_requests = 16384
hostname_lookups = no
log {
destination = files
colourise = yes
file = ${logdir}/radius.log
syslog_facility = daemon
stripped_names = no
auth = yes
auth_badpass = yes
auth_goodpass = no
msg_denied = "You are already logged in - access denied"
}
checkrad = ${sbindir}/checkrad
security {
allow_core_dumps = no
max_attributes = 200
reject_delay = 1
status_server = yes
}
proxy_requests = yes
$INCLUDE proxy.conf
$INCLUDE clients.conf
thread pool {
start_servers = 5
max_servers = 32
min_spare_servers = 3
max_spare_servers = 10
max_requests_per_server = 0
auto_limit_acct = no
}
modules {
$INCLUDE mods-enabled/
}
instantiate {
}
policy {
$INCLUDE policy.d/
}
$INCLUDE sites-enabled/
8
20.7 Legacy Series / freeradius does not start with DHCP enabled.
« on: August 15, 2020, 09:32:42 pm »
Hi to everybody,
im quite new to OPNsense and just got my setup of OPNsense 20.7-amd64 combined with a SG350X-24P working as Layer 3 Switch and some VLAN's running.
The Routing between the VLAN's is all done by the switch. Networklayout see attachment.
Now I want to get the DHCP functionality running.
The goal is to setup opnsense als DHCP for all VLAN's. Well after reading alot I just ended up that its not easy possible
.
Than I found this https://github.com/opnsense/plugins/issues/1105
I want the use freeradis to secure my IP-Camera VLAN so running DHCP over it too would be great.
If I understand it right this should be possible.
So I configured my switch for DHCP Relay as discribed here: https://www.cisco.com/c/en/us/support/docs/smb/switches/cisco-small-business-300-series-managed-switches/smb1070-dhcp-relay-configuration-on-300-series-managed-switch.html and set up freeradius (look attachement). 192.168.10.2 is the ip of my LAN interface connected to the switch with an Layer 3 port. The problem is now that freeradius does not start as soon as I activate DHCP. I dont understany why. The DHCPv4 Server from OPNsense is disabled btw.
Hope anyone can give me a hind what I'm doing wrong. The Log File of freeradius is completly empty...
im quite new to OPNsense and just got my setup of OPNsense 20.7-amd64 combined with a SG350X-24P working as Layer 3 Switch and some VLAN's running.
The Routing between the VLAN's is all done by the switch. Networklayout see attachment.
Now I want to get the DHCP functionality running.
The goal is to setup opnsense als DHCP for all VLAN's. Well after reading alot I just ended up that its not easy possible
.Than I found this https://github.com/opnsense/plugins/issues/1105
I want the use freeradis to secure my IP-Camera VLAN so running DHCP over it too would be great.
If I understand it right this should be possible.
So I configured my switch for DHCP Relay as discribed here: https://www.cisco.com/c/en/us/support/docs/smb/switches/cisco-small-business-300-series-managed-switches/smb1070-dhcp-relay-configuration-on-300-series-managed-switch.html and set up freeradius (look attachement). 192.168.10.2 is the ip of my LAN interface connected to the switch with an Layer 3 port. The problem is now that freeradius does not start as soon as I activate DHCP. I dont understany why. The DHCPv4 Server from OPNsense is disabled btw.
Hope anyone can give me a hind what I'm doing wrong. The Log File of freeradius is completly empty...
Pages: [1]