1
General Discussion / Re: UPnP issues?
« on: July 04, 2020, 06:53:09 pm »
What settings did you change in the NAT reflection? I too am having issues with getting UPnP to work correctly all the time. Thanks.
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1]
2
20.1 Legacy Series / Re: UPnP Issues
« on: July 04, 2020, 03:42:26 am »
It seems if I launch the game and UPnP is not recognized as being on I exit the game and login into my Opnsense box and refresh UPnP service and then start the game back up and it works.
3
20.1 Legacy Series / Re: UPnP Issues
« on: July 02, 2020, 04:06:01 pm »
Looking through the opnsense log I can see it start up the upnp service, but I thought it was strange to see promiscuous mode toggling every few minutes even though I do not have it checked on Suricata. Also suricata is set to just alert and not block.
4
20.1 Legacy Series / Re: UPnP Issues
« on: July 02, 2020, 03:02:01 am »
I did that and UPnP is still hit or miss, sometimes it shows enabled in the game and some times it does not. So no change.
5
20.1 Legacy Series / Re: UPnP Issues
« on: July 02, 2020, 01:59:29 am »
No the translation/target is set to interface address.
6
20.1 Legacy Series / Re: UPnP Issues
« on: July 01, 2020, 03:31:17 am »
The game is Elite Dangerous and I am just trying to connect my one machine to a friend's. I have a unifi switch 8 that both the OPNsense and my gaming pc are hooked up to. I do not have IGMP on.
7
20.1 Legacy Series / Re: UPnP Issues
« on: June 30, 2020, 01:55:41 am »
So updated the user specified permissions to: allow 1024-65535 192.168.2.10 1024-65535. Still no luck, I went in and disabled IPS on Suricata and still no luck. So let me bulletize my setup as of now:
Under UPnP I have it enabled
Allow UPnP port mapping checked
Allow NAT-PMP Port Mapping checked
External Interface set to WAN
Interface set to LAN
Log NAT-PMP checked
Use system time checked
User specified permissions "allow 1024-65535 192.168.2.10/32 1024-65535"
Firewall: NAT: Outbound mode set to Hybrid
WAN Rule Source Single Hose 192.168.2.10 32 from the drown down menu
Static-port checked
192.168.2.10 is the static IP I assigned to the PC.
Under UPnP I have it enabled
Allow UPnP port mapping checked
Allow NAT-PMP Port Mapping checked
External Interface set to WAN
Interface set to LAN
Log NAT-PMP checked
Use system time checked
User specified permissions "allow 1024-65535 192.168.2.10/32 1024-65535"
Firewall: NAT: Outbound mode set to Hybrid
WAN Rule Source Single Hose 192.168.2.10 32 from the drown down menu
Static-port checked
192.168.2.10 is the static IP I assigned to the PC.
8
20.1 Legacy Series / Re: UPnP Issues
« on: June 29, 2020, 12:10:32 am »
Wont the below open up all my ports? I was able to specify what port in the game it should use for the UPnP and made sure it was the same in my rules.
9
20.1 Legacy Series / UPnP Issues
« on: June 28, 2020, 04:47:42 am »
All,
Another new guy issue here, I need some help getting UPnP working correctly. I have a gaming PC that I need the UPnP to work for some games with some friends. I followed this link on how someone set up an xbox to work but it seems to not work completely for me. https://forum.opnsense.org/index.php?topic=8812.0
I set a static IP on my computer 192.168.X.XX
Installed the UPnP service on Opnsense
Enabled UPnP Port mapping
Allow NAT-PMP Port mapping
User specified permissions "allow 51XX 192.168.X.XX/32 51XX"
Firewall hybrid oubound Nat Rule Generation checked
Create a rule with the following set: "Source Address - Single Host or network - 192.168.X.XX/32" & "Static Port - Checked"
I'm not sure if these rules/settings are correct since I'm still new to Opnsense (only a couple of weeks now). It seems that if i turn off Suricata(monitor intrusion) I can get the UPnP option in the game to show on and I can connect to my friends in the game. If the rules are fine then, I guess it could be Suricata blocking? Thanks for the help. I did some further checking and have turned of Suricata and still cannot get UPnP to consistently work on this game.
Another new guy issue here, I need some help getting UPnP working correctly. I have a gaming PC that I need the UPnP to work for some games with some friends. I followed this link on how someone set up an xbox to work but it seems to not work completely for me. https://forum.opnsense.org/index.php?topic=8812.0
I set a static IP on my computer 192.168.X.XX
Installed the UPnP service on Opnsense
Enabled UPnP Port mapping
Allow NAT-PMP Port mapping
User specified permissions "allow 51XX 192.168.X.XX/32 51XX"
Firewall hybrid oubound Nat Rule Generation checked
Create a rule with the following set: "Source Address - Single Host or network - 192.168.X.XX/32" & "Static Port - Checked"
I'm not sure if these rules/settings are correct since I'm still new to Opnsense (only a couple of weeks now). It seems that if i turn off Suricata(monitor intrusion) I can get the UPnP option in the game to show on and I can connect to my friends in the game. If the rules are fine then, I guess it could be Suricata blocking? Thanks for the help. I did some further checking and have turned of Suricata and still cannot get UPnP to consistently work on this game.
Pages: [1]